| acceleration.threshold.exceeded.duration |
number |
seconds |
Duration of accerelation exceeding the threshold |
$FMS4 message |
| ain |
number |
volts |
Voltage on the analog input |
$FMS10 message |
| ain.event |
boolean |
|
AIN event |
$FMS10 message |
| can.abs.failure.indicator.state |
string |
|
Vehicle parameter for anti-lock brake system failure indicator read from CAN |
|
| can.abs.trailer.indicator.state |
string |
|
Vehicle parameter for ABS trailer indicator read from CAN |
|
| can.accelerator.pedal.kickdown.indicator.status |
boolean |
|
Accelerator pedal kickdown switch status, read from CAN |
$FMS1 message |
| can.accelerator.pedal.position |
number |
percentage |
Accelerator pedal position read from CAN |
$FMS1 message |
| can.adaptive.cruise.control.indicator.state |
string |
|
Vehicle parameter for adaptive cruise control indicator read from CAN |
|
| can.adblue.level.indicator.state |
string |
|
Vehicle parameter for AdBlue level indicator read from CAN |
|
| can.adblue.tempering.indicator.state |
string |
|
Vehicle parameter for AdBlue tempering indicator read from CAN |
|
| can.airbag.indicator.state |
string |
|
Vehicle parameter for airbag indicator read from CAN |
|
| can.air.filter.clogged.indicator.state |
string |
|
Vehicle parameter for air filter clogged indicator read from CAN |
|
| can.articulation.indicator.state |
string |
|
Vehicle parameter for articulation indicator read from CAN |
|
| can.auxiliary.air.pressure.indicator.state |
string |
|
Vehicle parameter for auxiliary air pressure indicator read from CAN |
|
| can.axle.weight |
number |
kg |
Weight on the axle read from CAN |
$FMS1 message |
| can.battery.charging.indicator.state |
string |
|
Vehicle parameter for battery charging condition indicator read from CAN |
|
| can.brake.failure.indicator.state |
string |
|
Vehicle parameter for brake failure/brake system malfunction indicator read from CAN |
|
| can.brake.lights.indicator.state |
string |
|
Vehicle parameter for brake lights indicator read from CAN |
|
| can.brake.lights.status |
boolean |
|
Brake lights are on, read from CAN |
$FMS8 message |
| can.bus.stop.brake.indicator.state |
string |
|
Vehicle parameter for bus stop brake indicator read from CAN |
|
| can.cooling.air.conditioning.indicator.state |
string |
|
Vehicle parameter for cooling air conditioning indicator read from CAN |
|
| can.cruise.status |
boolean |
|
CAN cruise control is active |
$FMS1 message |
| can.disabled.persons.indicator.state |
string |
|
Vehicle parameter for provision for disabled/handicapped persons indicator read from CAN |
|
| can.doors.lock.status |
boolean |
|
Doors locked, read from CAN |
$FMS8 message |
| can.ebs.indicator.state |
string |
|
Vehicle parameter for EBS indicator read from CAN |
|
| can.ebs.trailer.indicator.state |
string |
|
Vehicle parameter for EBS trailer indicator read from CAN |
|
| can.eco.mode.enabled.status |
boolean |
|
ECO mode enabled/disabled status |
$FMSEV1 message |
| can.emergency.braking.system.indicator.state |
string |
|
Vehicle parameter for advanced emergency braking system indicator read from CAN |
|
| can.engine.compartment.temperature.indicator.state |
string |
|
Vehicle parameter for engine compartment temperature indicator read from CAN |
|
| can.engine.coolant.level.indicator.state |
string |
|
Vehicle parameter for engine coolant level indicator read from CAN |
|
| can.engine.coolant.temperature.indicator.state |
string |
|
Vehicle parameter for engine coolant temperature indicator read from CAN |
|
| can.engine.emission.failure.indicator.state |
string |
|
Vehicle parameter for engine emission system failure (MIL) indicator read from CAN |
|
| can.engine.emission.filter.indicator.state |
string |
|
Vehicle parameter for engine emission filter (soot filter) indicator read from CAN |
|
| can.engine.mil.indicator.state |
string |
|
Vehicle parameter for engine/MIL indicator read from CAN |
|
| can.engine.motorhours |
number |
hours |
Total engine motorhours (engine work time) read from CAN |
$FMS1 message |
| can.engine.oil.indicator.state |
string |
|
Vehicle parameter for engine oil indicator read from CAN |
|
| can.engine.oil.level.indicator.state |
string |
|
Vehicle parameter for engine oil level indicator read from CAN |
|
| can.engine.oil.temperature.indicator.state |
string |
|
Vehicle parameter for engine oil temperature indicator read from CAN |
|
| can.engine.rpm |
number |
rpm |
Engine RPM read from CAN |
$FMS1 message |
| can.engine.running.status |
boolean |
|
Engine running status, read from CAN |
$FMS8 message |
| can.engine.temperature |
number |
celsius |
Engine temperature read from CAN |
$FMS1 message |
| can.engine.torque.level |
number |
percentage |
Engine torque level, read from CAN |
$FMS1 message |
| can.esc.indicator.state |
string |
|
Vehicle parameter for ESC indication read from CAN |
|
| can.esc.switched.off.indicator.state |
string |
|
Vehicle parameter for ESC switched off indicator read from CAN |
|
| can.ev.brake.regeneration.mileage |
number |
km |
Total distance covered during brake regeneration |
$FMSEV4 message |
| can.ev.brake.regeneration.time |
number |
seconds |
Total time spent in brake regeneration |
$FMSEV4 message |
| can.ev.total.charged.energy |
number |
kWh |
Total energy charged to EV battery |
$FMSEV4 message |
| can.ev.total.discharged.energy |
number |
kWh |
Total discharged energy |
$FMSEV4 message |
| can.ev.total.driving.discharged.energy |
number |
kWh |
Total discharged energy driving |
$FMSEV4 message |
| can.ev.total.idle.time |
number |
hours |
Total time vehicle was idle with speed=0 |
$FMSEV4 message |
| can.ev.total.ignition.on.time |
number |
hours |
Total time with ignition on |
$FMSEV4 message |
| can.ev.total.ignition.time.park |
number |
hours |
Total time with ignition on while in park |
$FMSEV4 message |
| can.ev.total.regenerated.charge.energy |
number |
kWh |
Total regenerated charge |
$FMSEV4 message |
| can.front.fog.light.indicator.state |
string |
|
Vehicle parameter for front fog light indicator read from CAN |
|
| can.front.fog.lights.status |
boolean |
|
CAN front fog lights are on |
$FMS8 message |
| can.front.left.door.status |
boolean |
|
CAN front left door is opened |
$FMS8 message |
| can.front.left.seatbelt.status |
boolean |
|
Front left seatbelt fastened status, read from CAN |
$FMS8 message |
| can.front.right.door.status |
boolean |
|
CAN front right door is opened |
$FMS8 message |
| can.front.right.seatbelt.status |
boolean |
|
Front right seatbelt fastened status, read from CAN |
$FMS8 message |
| can.front.wipers.status |
boolean |
|
Front wipers status, read fron CAN |
$FMS8 message |
| can.fuel.consumed |
number |
liters |
Fuel volume totally consumed by vehicle read from CAN |
$FMS1 message, $FMS3 message |
| can.fuel.filter.pressure.indicator.state |
string |
|
Vehicle parameter for fuel filter differential pressure indicator read from CAN |
|
| can.fuel.idle.consumed |
number |
liters |
Fuel volume totally consumed during idling state of the vehicle read from CAN |
$FMS4 message |
| can.fuel.level |
number |
percentage |
Fuel level in tank read from CAN |
$FMS1 message |
| can.fuel.level.indicator.state |
string |
|
Vehicle parameter for fuel level indicator read from CAN |
|
| can.hatch.open.indicator.state |
string |
|
Vehicle parameter for hatch open indicator read from CAN |
|
| can.hazard.lights.status |
boolean |
|
Hazard lights status, read from CAN |
$FMS8 message |
| can.hazard.warning.indicator.state |
string |
|
Vehicle parameter for hazard warning indicator read from CAN |
|
| can.height.control.indicator.state |
string |
|
Vehicle parameter for height control (levelling) indicator read from CAN |
|
| can.high.beam.indicator.state |
string |
|
Vehicle parameter for high beam/main beam indicator read from CAN |
|
| can.high.beam.status |
boolean |
|
CAN high beams are on |
$FMS8 message |
| can.ignition.switch.status |
boolean |
|
Ignition switch on/off status, read from CAN |
$FMS8 message |
| can.intake.map |
number |
kPa |
Intake manifold absolute pressure |
$FMS1 message |
| can.kneeling.indicator.state |
string |
|
Vehicle parameter for kneeling indicator read from CAN |
|
| can.lane.departure.indication.indicator.state |
string |
|
Vehicle parameter for lane departure indication read from CAN |
|
| can.left.turn.light.status |
boolean |
|
Left turn light is ON status, read from CAN |
$FMS8 message |
| can.low.beam.indicator.state |
string |
|
Vehicle parameter for low beam/dipped beam indicator read from CAN |
|
| can.lowering.indicator.state |
string |
|
Vehicle parameter for lowering indicator read from CAN |
|
| can.main.lights.status |
boolean |
|
Main lights status, read from CAN |
$FMS8 message |
| can.malfunction.general.failure.indicator.state |
string |
|
Vehicle parameter for malfunction/general failure indicator read from CAN |
|
| can.motor.failures.indicator.state |
string |
|
Vehicle parameter for electric motor failures indicator read from CAN |
|
| can.motor.rpm |
number |
rpm |
Electric motor speed, read from CAN |
$FMSEV1 message |
| can.motor.temperature |
number |
celsius |
Electric motor temperature, read from CAN |
$FMSEV1 message |
| can.motor.torque.level |
number |
percentage |
Electric motor torque level, read from CAN bus |
$FMSEV1 message |
| can.movement.status |
boolean |
|
Movement state read from CAN bus |
$FMS8 message |
| can.multiplex.system.indicator.state |
string |
|
Vehicle parameter for multiplex system indicator read from CAN bus |
|
| can.park.heating.indicator.state |
string |
|
Vehicle parameter for park heating indicator read from CAN |
|
| can.parking.brake.indicator.state |
string |
|
Vehicle parameter for parking brake indicator read from CAN |
|
| can.parking.brake.status |
boolean |
|
Parking break status from CAN |
$FMS8 message |
| can.pedal.brake.status |
boolean |
|
Footbrake pedal is depressed, read from CAN |
$FMS1 message |
| can.pedal.clutch.status |
boolean |
|
CAN clutch pedal pressed |
$FMS1 message |
| can.position.lights.indicator.state |
string |
|
Vehicle parameter for position lights/side lights indicator read from CAN |
|
| can.pram.request.indicator.state |
string |
|
Vehicle parameter for pram request indicator read from CAN |
|
| can.pto.state |
number |
|
Power take-off state, read from CAN |
$FMS1 message |
| can.raising.indicator.state |
string |
|
Vehicle parameter for raising indicator read from CAN |
|
| can.rear.fog.light.indicator.state |
string |
|
Vehicle parameter for rear fog light indicator read from CAN |
|
| can.rear.fog.lights.status |
boolean |
|
CAN rear fog lights are on |
$FMS8 message |
| can.rear.left.door.status |
boolean |
|
CAN rear left door is opened |
$FMS8 message |
| can.rear.left.seatbelt.status |
boolean |
|
Rear left seatbelt fastened status, read from CAN |
$FMS8 message |
| can.rear.right.door.status |
boolean |
|
CAN rear right door is opened |
$FMS8 message |
| can.rear.right.seatbelt.status |
boolean |
|
Rear right seatbelt fastened status, read from CAN |
$FMS8 message |
| can.rear.wipers.status |
boolean |
|
Rear wipers status, read from CAN |
$FMS8 message |
| can.retarder.indicator.state |
string |
|
Vehicle parameter for retarder indicator read from CAN |
|
| can.reverse.gear.status |
boolean |
|
CAN reverse gear is on |
$FMS8 message |
| can.right.turn.light.status |
boolean |
|
Right turn light is ON status, read from CAN |
$FMS8 message |
| can.seat.belt.indicator.state |
string |
|
Vehicle parameter for seat belt indicator read from CAN |
|
| can.seatbelt.indicator.status |
boolean |
|
Seatbelt warning indicator is on, read from CAN |
$FMS8 message |
| can.service.maintenance.indicator.state |
string |
|
Vehicle parameter for service/call for maintenance indicator read from CAN |
|
| can.service.mileage |
number |
km |
Service distance read from CAN |
$FMS1 message |
| can.steering.failure.indicator.state |
string |
|
Vehicle parameter for steering failure indicator read from CAN |
|
| can.steering.fluid.level.indicator.state |
string |
|
Vehicle parameter for steering fluid level indicator read from CAN |
|
| can.stop.request.indicator.state |
string |
|
Vehicle parameter for stop request indicator read from CAN |
|
| can.tachograph.indication.indicator.state |
string |
|
Vehicle parameter for tachograph indication read from CAN |
|
| can.tire.failure.indicator.state |
string |
|
Vehicle parameter for tire failure/malfunction indicator read from CAN |
|
| can.total.brake.applications |
number |
|
Total count of brake applications, read from CAN |
$FMS4 message |
| can.total.brake.threshold.exceeded.applications |
number |
|
Total count of break pedal application exceeding the threshold, read from CAN |
$FMS4 message |
| can.total.clutch.applications |
number |
|
Total count clutch pedal applications, read from CAN |
$FMS4 message |
| can.total.cruise.control.time |
number |
hours |
Total driving time when cruise control is ON, read from CAN |
$FMS4 message |
| can.total.driving.time |
number |
hours |
Engine run time read from CAN |
$FMS4 message |
| can.total.engine.idle.time |
number |
hours |
Time of engine running in idling status (vehicle stopped) since vehicle manufacture, read from CAN |
$FMS4 message |
| can.trailer.connected.indicator.state |
string |
|
Vehicle parameter for trailer connected indicator read from CAN |
|
| can.transmission.failure.indicator.state |
string |
|
Vehicle parameter for transmission failure/malfunction indicator read from CAN |
|
| can.transmission.fluid.temperature.indicator.state |
string |
|
Vehicle parameter for transmission fluid temperature indicator read from CAN |
|
| can.trunk.status |
boolean |
|
CAN trunk is opened |
$FMS8 message |
| can.turn.signals.indicator.state |
string |
|
Vehicle parameter for turn signals indicator read from CAN |
|
| can.vehicle.battery.charge.remaining.time |
number |
minutes |
Battery charging remaining time read from CAN |
$FMSEV1 message |
| can.vehicle.battery.charging.cable.connected.status |
boolean |
|
Vehicle battery charging cable connected/disconnected status, read from CAN |
$FMSEV1 message |
| can.vehicle.battery.charging.status |
boolean |
|
Vehicle battery charging status get from CAN Bus |
$FMSEV1 message |
| can.vehicle.battery.current |
number |
amperes |
Vehicle battery current, read from CAN |
$FMSEV1 message |
| can.vehicle.battery.level |
number |
percentage |
CAN-bus reported vehicle battery level for EV or HEV |
$FMSEV1 message |
| can.vehicle.battery.power.consumption |
number |
kWh/100km |
Vehicle battery power consumption read from CAN |
$FMSEV1 message |
| can.vehicle.battery.remaining.range |
number |
km |
Vehicle battery remaining range, read from CAN |
$FMSEV1 message |
| can.vehicle.battery.remaining.time |
number |
minutes |
Vehicle battery remaining range, read from CAN |
$FMSEV1 message |
| can.vehicle.battery.voltage |
number |
volts |
Vehicle battery voltage, read from CAN |
$FMSEV1 message |
| can.vehicle.mileage |
number |
km |
Total vehicle mileage read from CAN |
$FMS1 message, $FMS3 message |
| can.vehicle.speed |
number |
km/h |
Vehicle speed read from CAN |
$FMS1 message |
| can.windscreen.washer.fluid.indicator.state |
string |
|
Vehicle parameter for windscreen/windshield washer fluid indicator read from CAN bus |
|
| can.worn.brake.linings.indicator.state |
string |
|
Vehicle parameter for worn brake linings indicator read from CAN bus |
|
| channel.id |
number |
|
ID of channel that received a message |
|
| custom |
any |
|
Any custom parameter |
|
| dcf.firmware.version |
string |
|
DCF firmware version |
$POWERON message |
| device.firmware.version |
string |
|
Firmware revision |
$POWERON message |
| device.id |
number |
|
ID of device that received a message |
|
| device.name |
string |
|
Name of device that received a message |
|
| device.profile |
string |
|
Device profile |
$POWERON message |
| device.serial.number |
string |
|
Device serial number |
CONNECTION message |
| device.type.id |
number |
|
ID of device type of device that received a message |
|
| engine.ignition.status |
boolean |
|
Engine ignition or ACC status |
$POWERON message, $SHUTDOWN message |
| engine.torque.threshold.exceeded.duration |
number |
seconds |
Duration of engine torque exceeding the threshold |
$FMS4 message |
| envelope.version |
string |
|
Envelope protocol version |
Envelope header |
| external.powersource.voltage |
number |
volts |
External power voltage |
$FMS10 message |
| external.powersource.voltage.status |
boolean |
|
Voltage of external supply is normal (true - inside the predefined range) or abnormal (false - outside of the predefined range) |
$FMS10 message |
| fms.pto.fuel.used |
number |
liters |
FMS Eco driving PTO fuel used |
$FMS4 message |
| fms.pto.time |
number |
seconds |
FMS Eco driving PTO time |
$FMS4 message |
| fota.state |
number |
|
FOTA status |
$FOTASTATUS message |
| gsm.network.name |
string |
|
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) operator name |
CONNECTION message |
| gsm.network.type |
string |
|
The type of the Mobile network the device is currently registered to |
CONNECTION message |
| gsm.sim.iccid |
string |
|
Integrated Circuit Card Id of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) |
|
| ident |
string |
|
Device unique identifier like serial number, IMEI, etc |
|
| idle.threshold.exceeded.duration |
number |
seconds |
Duration of idle state exceeding the threshold |
$FMS4 message |
| last.fota.timestamp |
number |
seconds |
Last FOTA time |
$FOTASTATUS message |
| media |
boolean |
|
Message contain media file |
|
| media.video |
object |
|
Video file in media storage |
|
| message.buffered.status |
boolean |
|
Black box message |
Envelope header |
| modem.firmware.version |
string |
|
Firmware version of the modem |
$POWERON message |
| next.fota.timestamp |
number |
seconds |
Next planned FOTA time |
$FOTASTATUS message |
| payload.text |
string |
|
Text Payload received from device |
|
| peer |
string |
|
IP:port from which device connecting to the channel |
|
| position.altitude |
number |
meters |
Altitude value for position |
Message header |
| position.direction |
number |
degrees |
Heading angle at position detection moment |
Message header |
| position.hdop |
number |
|
Horizontal dilution of precision |
Message header |
| position.latitude |
number |
degrees |
Latitude coordinate value |
Message header |
| position.longitude |
number |
degrees |
Longitude coordinate value |
Message header |
| position.satellites |
number |
|
Quantity of satellites used to calculate coordinates for given position information |
Message header |
| position.speed |
number |
km/h |
Instant speed at position detection moment |
Message header |
| power.off.reason |
string |
|
Power off reason |
$SHUTDOWN message |
| power.on.reason |
string |
|
Power on reason |
$POWERON message |
| protocol.id |
number |
|
ID of protocol |
|
| protocol.version |
string |
|
Protocol version string |
Message header |
| record.seqnum |
number |
|
Registered record sequence number |
Envelope header |
| report.code |
string |
|
Report code |
|
| rpm.threshold.exceeded.duration |
number |
seconds |
Duration of RPM exceeding the threshold |
$FMS4 message |
| server.timestamp |
number |
seconds |
Timestamp when server received a message |
|
| speed.threshold.exceeded.duration |
number |
seconds |
Duration of speed exceeding the threshold |
$FMS4 message |
| tacho.diagnose.test.state |
number |
|
Diagnose test performed by tachograph |
$FMS3 message |
| tacho.driver.card.code |
string |
|
Driver identification card id for tacho |
$FMS3 message |
| tacho.driver.card.status |
boolean |
|
Tacho driver card status |
$FMS3 message |
| tacho.drive.recognize.status |
boolean |
|
Tacho recognized vehicle drive |
$FMS3 message |
| tacho.driver.time.state |
string |
|
Tacho driver time related states |
$FMS3 message |
| tacho.driver.time.state.enum |
number |
|
Tacho driver time related states |
$FMS3 message |
| tacho.driver.work.state.enum |
number |
|
Protocol-specific driver work state value |
$FMS3 message |
| tacho.driving.direction |
number |
|
Tacho driving direction, 0 - forward, 1 - reverse, 2 - error, 3 - not available |
$FMS3 message |
| tacho.handling.info.status |
boolean |
|
Tachograp is handling information |
$FMS3 message |
| tacho.overspeed.status |
boolean |
|
Tachograph overspeed status |
$FMS3 message |
| tacho.position.speed |
number |
km/h |
Instant speed reported by tacho |
$FMS3 message |
| tacho.system.event.status |
boolean |
|
Tacho system event occurred |
$FMS3 message |
| timestamp |
number |
seconds |
Message timestamp |
Message header |
| trailer.abs.active.count |
number |
|
The number of times ABS (anti-lock braking system) has been actived for trailer |
$FMS12 message |
| trailer.cargo.weight |
number |
kg |
Cargo weight in trailer |
$FMS12 message |
| trailer.couple.status |
boolean |
|
Trailer coupled/decoupled status |
$FMS12 message |
| trailer.ebs.awl.status |
boolean |
|
State of the EBS (electronic braking system) amber warning light for trailer |
$FMS12 message |
| trailer.ebs.rsl.status |
boolean |
|
State of the EBS (electronic braking system) red stop light for trailer |
$FMS12 message |
| trailer.esc.active.count |
number |
|
The number of times ESC (electronic stability control system) has been actived for trailer |
$FMS12 message |
| trailer.id |
string |
|
Trailer ID |
$FMS12 message |
| trailer.total.axle.weight |
number |
kg |
Weight on the axles of trailer |
$FMS12 message |
| trailer.vin |
string |
|
Trailer VIN |
$FMS12 message |
| trailer.weight |
number |
kg |
Total weight of trailer |
$FMS12 message |
| updater.firmware.version |
string |
|
Updater firmware version |
$POWERON message |
| vehicle.interface.firmware.version |
string |
|
Vehicle interace firmware version |
$POWERON message |
| vehicle.registration.number |
string |
|
Vehicle registration number |
$FMS2 message |
| vehicle.vin |
string |
|
VIN of vehicle |
$FMS2 message |
