| Parameter | Type | Unit | Description | Sources |
|---|---|---|---|---|
| acceleration.array | array | g | Array of objects with acceleration data by x, y, and z axis | Protocol ID 0x4003 |
| alarm.event | boolean | Alarm event triggered | Protocol ID 0x4007 with Alarm Type 0x10, Protocol ID 0x401F with Alarm Type 0x10 | |
| alcohol.fuel.percentage | number | percentage | Alcohol fuel percentage | PID 0x2152 |
| can.absolute.fuel.rail.pressure | number | kPa | Absolute fuel rail pressure | PID 0x2159 |
| can.absolute.load | number | percentage | Absolute load value - the normalized value of air mass per intake stroke, read from CAN | PID 0x2143 |
| can.accelerator.pedal.position | number | percentage | Accelerator pedal position read from CAN | PID 0x2149, PID 0x214A, PID 0x214B, PID 0x22E3 |
| can.adblue.level | number | percentage | AdBlue (diesel exhaust fluid) level read from CAN | PID 0x06E1 |
| can.air.filter.differential.pressure | number | kPa | Air filter differential pressure read from CAN | PID 0x006B |
| can.ambient.air.temperature | number | celsius | CAN ambient air temperature | PID 0x2146 |
| can.auxiliary.battery.voltage | number | volts | EV or HEV auxiliary battery voltage, read from CAN | PID 0x2242 |
| can.average.fuel.economy | number | km/liters | CAN average fuel economy | PID 0x00B9 |
| can.barometric.pressure | number | kPa | Absolute barometric pressure read from CAN | PID 0x006A, PID 0x2133 |
| can.battery.voltage | number | volts | Battery voltage read from CAN | PID 0x00A8 |
| can.catalyst.temperature | number | degrees | Catalyst temperature of the corresponding oxygen sensor read from CAN | PID 0x213C, PID 0x213D, PID 0x213E, PID 0x213F |
| can.central.lock.status | boolean | CAN central lock is locked | Protocol ID 0xB007 | |
| can.commanded.egr | number | percentage | Commanded EGR value read from CAN | PID 0x212C |
| can.control.module.voltage | number | volts | Control module voltage read from CAN | PID 0x2142 |
| can.coolant.filter.differential.pressure | number | kPa | Coolant filter differential pressure read from CAN | PID 0x0070 |
| can.crankcase.pressure | number | kPa | Crankcase pressure read from CAN | PID 0x0065 |
| can.crankcase.pressure.extended | number | kPa | Extended crankcase pressure read from CAN | PID 0x0016 |
| can.cruise.control.speed | number | km/h | Cruise control set speed read from CAN | PID 0x0056 |
| can.current.drive.cycle.monitor.state | string | Monitor status this driving cycle, read from CAN, in HEX format | PID 0x2141 | |
| can.direct.fuel.rail.pressure | number | kPa | Fuel rail gauge pressure for diesel or gasoline direct injection | PID 0x2123 |
| can.dpf.inlet.pressure | number | kPa | Pressure before DPF read from CAN | PID 0x0051 |
| can.drive.gear.status | boolean | CAN drive gear is on | PID 0x22C5 | |
| can.driver.door.status | boolean | Driver door opened status, read from CAN | PID 0x22DA | |
| can.driver.seatbelt.status | boolean | Driver's seatbelt fastened status, read from CAN | PID 0x22DB | |
| can.dtc | array | Diagnostic trouble code array read from CAN May content list of OBDII codes or list of objects with codes. Standard object parameter names used: *standard* - Protocol standard (J1939, J1708(J1587), OBDII) *mid* - Message Identifier (J1708) *sid* - Subsystem Identifier (J1708) *fmi* - Failure Mode Identifier (J1939, J1708) *spn* - Suspect Parameter Number (J1939) *sa* - Source Address (J1939, OBDII) *oc* - Occurrence Count (J1939) *cm* - Conversion Method (J1939) *status* - Status of error code (active, pending, historical, permanent) |
Protocol ID 0x4006, Protocol ID 0x400B, Protocol ID 0x401F | |
| can.dtc.cleared.engine.time | number | hours | Engine runtime since DTCs cleared, read from CAN | PID 0x214E |
| can.dtc.cleared.mileage | number | km | Vehicle mileage since diagnostic trouble codes were cleared, read from CAN | PID 0x2131 |
| can.dtc.cleared.warmups | number | Number of warm-ups since DTCs cleared read from CAN | PID 0x2130 | |
| can.egr.error | number | percentage | EGR Error read from CAN | PID 0x212D |
| can.engine.coolant.level | number | percentage | Engine coolant level read from CAN | PID 0x006F |
| can.engine.coolant.pressure | number | kPa | Engine coolant pressure | PID 0x006D |
| can.engine.coolant.temperature | number | celsius | Engine coolant temperature read from CAN | PID 0x006E, PID 0x2105, PID 0x2167 |
| can.engine.exhaust.temperature | number | celsius | Engine exhaust temperature read from CAN | PID 0x00AD |
| can.engine.fuel.rate | number | liters/h | Engine fuel rate read from CAN | PID 0x00B7, PID 0x215E, PID 0x4004, PID 0x4005 |
| can.engine.ignition.status | boolean | CAN engine ignition status | PID 0x22C6 | |
| can.engine.load.level | number | percentage | Calculated engine load level read from CAN | PID 0x005C, PID 0x2104, PID 0x4000, PID 0x4001 |
| can.engine.motorhours | number | hours | Total engine motorhours (engine work time) read from CAN | PID 0x00F7 |
| can.engine.oil.level | number | percentage | Engine oil level read from CAN | PID 0x0062 |
| can.engine.oil.pressure | number | kPa | CAN Engine oil pressure | PID 0x0064 |
| can.engine.oil.temperature | number | celsius | Engine oil temperature read from CAN | PID 0x00AF, PID 0x215C |
| can.engine.revolutions | number | Engine total revolutions read from CAN | PID 0x00F9 | |
| can.engine.rpm | number | rpm | Engine RPM read from CAN | PID 0x00BE, PID 0x210C, Protocol ID 0x4001 |
| can.engine.run.time | number | seconds | Run time since engine start read from CAN | PID 0x211F, PID 0x217F |
| can.engine.status | boolean | Engine is running status, read from CAN | Protocol ID 0xB007 | |
| can.engine.temperature | number | celsius | Engine temperature read from CAN | PID 0x4008, PID 0x4009 |
| can.equivalence.ratio | number | Fuel-air commanded equivalence ratio read from CAN | PID 0x2144 | |
| can.evaporative.purge | number | percentage | Commanded evaporative purge read from CAN | PID 0x212E |
| can.evap.vapor.pressure | number | Pa | EVAP system vapor pressure, read from CAN | PID 0x2132, PID 0x2154 |
| can.freeze.dtc | string | Diagnostic trouble code from freeze frame, read from CAN | PID 0x2102 | |
| can.fresh.water.level | number | percentage | Fresh water level read from CAN | PID 0x4014 |
| can.front.left.door.lock.state | number | Left front door lock state, read from CAN | PID 0x22D0 | |
| can.front.left.door.state | number | Left front door state, read from CAN | PID 0x22D5 | |
| can.front.left.door.status | boolean | CAN front left door is opened | Protocol ID 0xB007 | |
| can.front.left.wheel.temperature | number | celsius | Left front wheel temperature, read from CAN | PID 0x22EA |
| can.front.passenger.seatbelt.status | boolean | Fron passenger's seatbelt fastened status, read from CAN | PID 0x22DC | |
| can.front.right.door.lock.state | number | Right front door lock state, read from CAN | PID 0x22D2 | |
| can.front.right.door.state | number | Right front door state, read from CAN | PID 0x22D7 | |
| can.front.right.door.status | boolean | CAN front right door is opened | Protocol ID 0xB007 | |
| can.front.right.wheel.temperature | number | celsius | Right front wheel temperature, read from CAN | PID 0x22EB |
| can.fuel.consumed | number | liters | Fuel volume totally consumed by vehicle read from CAN | PID 0x00FA |
| can.fuel.economy | number | km/liters | CAN instantaneous fuel economy | PID 0x00B8 |
| can.fuel.idle.consumed | number | liters | Fuel volume totally consumed during idling state of the vehicle read from CAN | PID 0x00EC, PID 0x03EC |
| can.fuel.injection.timing | number | degrees | Fuel injection timing read from CAN | PID 0x215D |
| can.fuel.level | number | percentage | Fuel level in tank read from CAN | PID 0x0026, PID 0x0060, PID 0x212F, PID 0x3260, PID 0x4011, PID 0x4012 |
| can.fuel.pressure | number | kPa | Fuel pressure read from CAN | PID 0x005E, PID 0x210A |
| can.fuel.rate | number | g/sec | Fuel rate read from CAN | PID 0x219D |
| can.fuel.system.state | number | Fuel system status read from CAN, bits 0 - open loop, 1 - closed loop, 2 - open loop drive, 3 - open loop fault, 4 - closed loop fault | PID 0x2103 | |
| can.fuel.temperature | number | celsius | Fuel temperature read from CAN | PID 0x00AE |
| can.fuel.type.enum | number | Fuel type read from CAN | PID 0x2151 | |
| can.gear | number | Current gear read from CAN | PID 0x21A4, PID 0x22C5 | |
| can.gear.ratio | number | Transmission actual gear ratio read from CAN | PID 0x21A4 | |
| can.handbrake.status | boolean | CAN handbrake is pulled up | Protocol ID 0xB007 | |
| can.hood.status | boolean | CAN hood is opened | Protocol ID 0xB007 | |
| can.hybrid.battery.pack.life | number | percentage | Hybrid battery pack remaining life | PID 0x215B |
| can.intake.air.temperature | number | celsius | Intake air temperature | PID 0x0069, PID 0x210F, PID 0x2168 |
| can.intake.map | number | kPa | Intake manifold absolute pressure | PID 0x0066, PID 0x210B, PID 0x2187 |
| can.intercooler.temperature | number | celsius | Engine intercooler temperature read from CAN | PID 0x0034 |
| can.left.front.tire.pressure | number | bar | Left front tire pressure, read from CAN | PID 0x22E6 |
| can.left.rear.tire.pressure | number | bar | Left rear tire pressure, read from CAN | PID 0x22E8 |
| can.long.fuel.trim | number | percentage | Short term fuel trim read from CAN | PID 0x2107, PID 0x2109 |
| can.maf.air.flow.rate | number | g/sec | MAF air flow rate read from CAN | PID 0x0084, PID 0x2110 |
| can.maf.max.air.flow.rate | number | g/sec | Maximum value for air flow rate from mass air flow sensor, read from CAN | PID 0x2150 |
| can.mil.mileage | number | km | Distance traveled while malfunction indicator lamp is activated, read from CAN | PID 0x2121 |
| can.mil.status | boolean | Malfunction indicator lamp status read from CAN | Protocol ID 0x4007 with Alarm Type 0x18, Protocol ID 0x401F with Alarm Type 0x18 | |
| can.mil.time | number | hours | Time run with malfunction indicator lamp activated, read from CAN | PID 0x214D |
| can.motor.controller.temperature | number | celsius | Electric motor controller temperature, read from CAN | PID 0x2211 |
| can.motor.current | number | amperes | Electric motor current, read from CAN | PID 0x2214 |
| can.motor.rpm | number | rpm | Electric motor speed, read from CAN | PID 0x220C, PID 0x220E |
| can.motor.status | boolean | Electric motor status | PID 0x220F | |
| can.motor.temperature | number | celsius | Electric motor temperature, read from CAN | PID 0x2210 |
| can.motor.torque | number | Nm | Electric motor torque, read from CAN | PID 0x2212 |
| can.motor.voltage | number | volts | Electric motor voltage read, read from CAN bus | PID 0x2213 |
| can.neutral.gear.status | boolean | CAN neutral gear is on | PID 0x22C5 | |
| can.oxygen.sensor.bitmask | number | Oxygen sensor bitmask read from CAN bus | PID 0x211D | |
| can.oxygen.sensor.current | number | mA | Oxygen sensor current read from CAN bus | PID 0x2134, PID 0x2135, PID 0x2136, PID 0x2137, PID 0x2138, PID 0x2139, PID 0x213A, PID 0x213B |
| can.oxygen.sensor.fuel.air.ratio | number | Fuel-air equivalence ratio for the corresponding oxygen sensor read from CAN bus | PID 0x2124, PID 0x2125, PID 0x2126, PID 0x2127, PID 0x2128, PID 0x2129, PID 0x212A, PID 0x212B, PID 0x2134, PID 0x2135, PID 0x2136, PID 0x2137, PID 0x2138, PID 0x2139, PID 0x213A, PID 0x213B | |
| can.oxygen.sensor.fuel.trim | number | percentage | Short term fuel trim associated with current oxygen sensor | PID 0x2114, PID 0x2115, PID 0x2116, PID 0x2117, PID 0x2118, PID 0x2119, PID 0x211A, PID 0x211B |
| can.oxygen.sensor.max.current | number | mA | Maximum value for Oxygen sensor current | PID 0x214F |
| can.oxygen.sensor.max.fuel.air.ratio | number | Maximum value for the equivalence ratio of Oxygen sensor | PID 0x214F | |
| can.oxygen.sensor.max.pressure | number | kPa | Maximum value for intake manifold absolute pressure | PID 0x214F |
| can.oxygen.sensor.max.voltage | number | volts | Maximum value for Oxygen sensor voltage | PID 0x214F |
| can.oxygen.sensor.output.voltage | number | volts | Oxygen sensor output voltage read from CAN | PID 0x2114, PID 0x2115, PID 0x2116, PID 0x2117, PID 0x2118, PID 0x2119, PID 0x211A, PID 0x211B |
| can.oxygen.sensors.state | number | Location of oxygen sensors, bits 0 - sensor 1, 1 - sensor 2, 2 - sensor 3 etc. Bank1 sensors 1,2, bank 2 sensors 3,4 etc. | PID 0x2113 | |
| can.oxygen.sensor.voltage | number | volts | Voltage of the corresponding oxygen sensor read from CAN | PID 0x2124, PID 0x2125, PID 0x2126, PID 0x2127, PID 0x2128, PID 0x2129, PID 0x212A, PID 0x212B |
| can.pedal.brake.status | boolean | Footbrake pedal is depressed, read from CAN | PID 0x22E4, Protocol ID 0xB007 | |
| can.pto.run.time | number | seconds | Power Take-Off run time read from CAN | PID 0x217F |
| can.pto.status | boolean | Power take-off status, read from CAN | PID 0x211E | |
| can.rear.left.door.lock.state | number | Left rear door lock state, read from CAN | PID 0x22D1 | |
| can.rear.left.door.state | number | Left rear door state, read from CAN | PID 0x22D6 | |
| can.rear.left.door.status | boolean | CAN rear left door is opened | Protocol ID 0xB007 | |
| can.rear.left.wheel.temperature | number | celsius | Rear left wheel temperature, read from CAN | PID 0x22EC |
| can.rear.right.door.lock.state | number | Right rear door lock state, read from CAN | PID 0x22D3 | |
| can.rear.right.door.state | number | Right rear door state, read from CAN | PID 0x22D8 | |
| can.rear.right.door.status | boolean | CAN rear right door is opened | Protocol ID 0xB007 | |
| can.rear.right.wheel.temperature | number | celsius | Rear right wheel temperature, read from CAN | PID 0x22ED |
| can.relative.accelerator.pedal.position | number | percentage | Relative accelerator pedal position read from CAN | PID 0x215A |
| can.relative.fuel.rail.pressure | number | kPa | Fuel rail pressure relative to manifold vacuum | PID 0x2122 |
| can.relative.throttle.position | number | percentage | Relative throttle position read from CAN | PID 0x2145 |
| can.reverse.gear.status | boolean | CAN reverse gear is on | PID 0x22C5 | |
| can.right.front.tire.pressure | number | bar | Right front tire pressure, read from CAN | PID 0x22E7 |
| can.right.rear.tire.pressure | number | bar | Right rear tire pressure, read from CAN | PID 0x22E9 |
| can.secondary.air.state | number | Commanded secondary air status read from CAN | PID 0x2112 | |
| can.secondary.long.fuel.trim | number | percentage | Long term secondary oxygen sensor fuel trim, index - the number of bank | PID 0x2156, PID 0x2158 |
| can.secondary.short.fuel.trim | number | percentage | Short term secondary oxygen sensor fuel trim, index - the number of bank | PID 0x2155, PID 0x2157 |
| can.service.mileage | number | km | Service distance read from CAN | PID 0x0392 |
| can.short.fuel.trim | number | percentage | Short term fuel trim read from CAN | PID 0x2106, PID 0x2108 |
| can.throttle.actuator | number | percentage | Commanded throttle actuator position read from CAN | PID 0x214C |
| can.throttle.pedal.level | number | percentage | Throttle pedal push level read from CAN | PID 0x005B |
| can.throttle.position | number | percentage | Absolute throttle position for corresponding throttle position sensor read from CAN | PID 0x2111, PID 0x2147, PID 0x2148 |
| can.timing.advance | number | degrees | Ignition timing advance read from CAN | PID 0x210E |
| can.total.engine.idle.time | number | hours | Time of engine running in idling status (vehicle stopped) since vehicle manufacture, read from CAN | PID 0x217F |
| can.transmission.input.speed | number | rpm | Transmittion input speed read from CAN | PID 0x00A1 |
| can.transmission.oil.temperature | number | celsius | Transmission oil temperature reaed from CAN | PID 0x00B1 |
| can.trip.fuel.consumed | number | liters | Volume of liquid fuel consumed during the trip, read from CAN | PID 0x00B6, PID 0x03E9, PID 0x1B60, PID 0x3043 |
| can.trunk.lock.state | number | Trunk lock state, read from CAN | PID 0x22D4 | |
| can.trunk.state | number | Trunk state, read from CAN | PID 0x22D9 | |
| can.turbo.oil.temperature | number | celsius | Turbocharger oil temperature read from CAN | PID 0x00B0 |
| can.vehicle.battery.charge.count | number | Vehicle battery charging times, read from CAN | PID 0x22C9 | |
| can.vehicle.battery.charge.energy | number | kWh | Vehicle battery charging energy amount single time, read from CAN | PID 0x22C7 |
| can.vehicle.battery.charge.state | string | Vehicle battery charge state description, detected from CAN | PID 0x22C1 | |
| can.vehicle.battery.charging.status | boolean | Vehicle battery charging status get from CAN Bus | PID 0x22C1 | |
| can.vehicle.battery.current | number | amperes | Vehicle battery current, read from CAN | PID 0x22CA |
| can.vehicle.battery.discharge.energy | number | kWh | Vehicle battery discharging energy single time, read from CAN | PID 0x22C8 |
| can.vehicle.battery.energy.consumed | number | kWh | Energy consumed from the vehicle battery read from CAN | PID 0x22E0 |
| can.vehicle.battery.insulation.resistance | number | kΩ | Battery insulation resistance, read from CAN | PID 0x22C3 |
| can.vehicle.battery.level | number | percentage | CAN-bus reported vehicle battery level for EV or HEV | PID 0x222F |
| can.vehicle.battery.power.consumption | number | kWh/100km | Vehicle battery power consumption read from CAN | PID 0x22DF |
| can.vehicle.battery.total.charge.energy | number | kWh | Vehicle battery charged total energy, read from CAN | PID 0x22E1 |
| can.vehicle.battery.voltage | number | volts | Vehicle battery voltage, read from CAN | PID 0x22C4 |
| can.vehicle.mileage | number | km | Total vehicle mileage read from CAN | PID 0x00F5, PID 0x21A6, PID 0x22A6 |
| can.vehicle.remaining.range | number | km | Vehicle Range read, from CAN | PID 0x4020 |
| can.vehicle.speed | number | km/h | Vehicle speed read from CAN | PID 0x0054, PID 0x210D, PID 0x220D |
| can.water.depth | number | meters | Water depth read from CAN bus | PID 0x4030 |
| can.water.temperature | number | celsius | Water temperature read from CAN bus | PID 0x4050 |
| can.wind.direction | number | rad | Wind direction read from CAN bus bus | PID 0x4040 |
| can.wind.speed | number | m/s | Wind speed read from CAN bus | PID 0x4041 |
| channel.id | number | ID of channel that received a message | ||
| cp.charging.state | number | EV CP charging state | PID 0x22DD | |
| crash.direction.enum | number | Crash direction - front, rear, left, right etc. | Protocol ID 0x4007 with Alarm Type 0x11, Protocol ID 0x401F with Alarm Type 0x11 | |
| crash.event | boolean | Crash event detected | Protocol ID 0x4007 with Alarm Type 0x11, Protocol ID 0x401F with Alarm Type 0x11 | |
| current.fuel.consumed | number | liters | Total fuel consumption from the latest ACC ON time to current time | Protocol ID 0x1001, Protocol ID 0x1002, Protocol ID 0x4001, Protocol ID 0x4002, Protocol ID 0x4003, Protocol ID 0x4004, Protocol ID 0x4005, Protocol ID 0x4006, Protocol ID 0x4007, Protocol ID 0x4008, Protocol ID 0x400B, Protocol ID 0x400C, Protocol ID 0x400D, Protocol ID 0x401F |
| current.trip.mileage | number | km | Mileage from the latest ACC ON time to current time | Protocol ID 0x1001, Protocol ID 0x1002, Protocol ID 0x4001, Protocol ID 0x4002, Protocol ID 0x4003, Protocol ID 0x4004, Protocol ID 0x4005, Protocol ID 0x4006, Protocol ID 0x4007, Protocol ID 0x4008, Protocol ID 0x400B, Protocol ID 0x400C, Protocol ID 0x400D, Protocol ID 0x401F |
| dangerous.driving.event | boolean | Dangerous driving event | Protocol ID 0x4007 with Alarm Type 0x1B, Protocol ID 0x401F with Alarm Type 0x1B | |
| device.id | number | ID of device that received a message | ||
| device.name | string | Name of device that received a message | ||
| device.type.id | number | ID of device type of device that received a message | ||
| ecu.speed.limit | number | km/h | Vehicle speed limit set in ECU | PID 0x22E5 |
| engine.blocked.status | boolean | Engine blocked status (fuel cutoff relay), true - engine is blocked, false - engine isn't blocked | Protocol ID 0xB007 | |
| engine.ignition.status | boolean | Engine ignition or ACC status | Protocol ID 0x4007 with Alarm Type 0x16, Protocol ID 0x4007 with Alarm Type 0x17, Protocol ID 0x401F with Alarm Type 0x16, Protocol ID 0x401F with Alarm Type 0x17, Protocol ID 0xB007 | |
| engine.temperature.high.status | boolean | High engine coolant temperature | Protocol ID 0x4007 with Alarm Type 0x03, Protocol ID 0x401F with Alarm Type 0x03 | |
| event.enum | number | Protocol-specific event code | Protocol ID 0x4007, Protocol ID 0x401F | |
| exhaust.emission.status | boolean | Exhaust emission | Protocol ID 0x4007 with Alarm Type 0x0A, Protocol ID 0x401F with Alarm Type 0x0A | |
| fatigue.driving.status | boolean | Fatigue driving | Protocol ID 0x4007 with Alarm Type 0x0D, Protocol ID 0x401F with Alarm Type 0x0D | |
| firmware.update.code | number | Firmware update confirmation code | Protocol ID 0xD005 | |
| firmware.update.type | number | Firmware update type | Protocol ID 0xD005 | |
| geofence.id | number | Geofence ID | Protocol ID 0x4007 with Alarm Type 0x0F, Protocol ID 0x401F with Alarm Type 0x0F | |
| geofence.status | boolean | Geofence entered status | Protocol ID 0x4007 with Alarm Type 0x0F, Protocol ID 0x401F with Alarm Type 0x0F | |
| gnss.status | boolean | GNSS receiver on/off status | ||
| gsm.cellid | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID | Protocol ID 0x4008 | |
| gsm.lac | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code | Protocol ID 0x4008 | |
| gsm.sim.iccid | string | Integrated Circuit Card Id of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Protocol ID 0xA002 | |
| gsm.sim.imsi | string | IMSI of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Protocol ID 0xA002 | |
| hardware.version | string | Hardware version | Protocol ID 0x1001 | |
| harsh.acceleration.event | boolean | Harsh acceleration detected | Protocol ID 0x4007 with Alarm Type 0x04, Protocol ID 0x401F with Alarm Type 0x04 | |
| harsh.braking.event | boolean | Harsh braking detected | Protocol ID 0x4007 with Alarm Type 0x05, Protocol ID 0x401F with Alarm Type 0x05 | |
| harsh.cornering.event | boolean | Harsh cornering detected | Protocol ID 0x4007 with Alarm Type 0x0C, Protocol ID 0x401F with Alarm Type 0x0C | |
| headlight.status | boolean | Headlights status | Protocol ID 0xB007 | |
| high.rpm.status | boolean | High engine RPM | Protocol ID 0x4007 with Alarm Type 0x08, Protocol ID 0x401F with Alarm Type 0x08 | |
| ibutton.code | string | Hexadecimal code of connected iButton | Protocol ID 0x400C | |
| ident | string | Device unique identifier like serial number, IMEI, etc | ||
| idle.status | boolean | Vehicle is in idling state | Protocol ID 0x4007 with Alarm Type 0x06, Protocol ID 0x401F with Alarm Type 0x06 | |
| ignition.on.timestamp | number | seconds | The latest ACC ON timestamp | Protocol ID 0x1001, Protocol ID 0x1002, Protocol ID 0x4001, Protocol ID 0x4002, Protocol ID 0x4003, Protocol ID 0x4004, Protocol ID 0x4005, Protocol ID 0x4006, Protocol ID 0x4007, Protocol ID 0x4008, Protocol ID 0x400B, Protocol ID 0x400C, Protocol ID 0x400D, Protocol ID 0x401F |
| illegal.enter.event | boolean | Illegal enter | Protocol ID 0x4007 with Alarm Type 0x13, Protocol ID 0x401F with Alarm Type 0x13 | |
| illegal.ignition.event | boolean | Illegal ignition | Protocol ID 0x4007 with Alarm Type 0x14, Protocol ID 0x401F with Alarm Type 0x14 | |
| message.buffered.status | boolean | Black box message | Protocol ID 0x4001, Protocol ID 0x401F | |
| no.card.event | boolean | No card presented | Protocol ID 0x4007 with Alarm Type 0x1A, Protocol ID 0x401F with Alarm Type 0x1A | |
| obd.error.event | boolean | OBD communication error | Protocol ID 0x4007 with Alarm Type 0x15, Protocol ID 0x401F with Alarm Type 0x15 | |
| obd.standard.enum | number | OBD standards this vehicle conforms to | PID 0x211C | |
| overspeeding.event | boolean | Overspeeding detected | ||
| overspeeding.status | boolean | Overspeeding detected | Protocol ID 0x4007 with Alarm Type 0x01, Protocol ID 0x401F with Alarm Type 0x01 | |
| peer | string | IP:port from which device connecting to the channel | ||
| position.direction | number | degrees | Heading angle at position detection moment | Protocol ID 0x4009 |
| position.fix.type | number | GNSS fix type enum (0 = "not fixed", 1 = "2D", 2 = "3D", null = "unknown") | Protocol ID 0x4009 | |
| position.latitude | number | degrees | Latitude coordinate value | Protocol ID 0x4009 |
| position.longitude | number | degrees | Longitude coordinate value | Protocol ID 0x4009 |
| position.satellites | number | Quantity of satellites used to calculate coordinates for given position information | Protocol ID 0x4009 | |
| position.speed | number | km/h | Instant speed at position detection moment | Protocol ID 0x4009 |
| position.timestamp | number | seconds | Timestamp when coordinates where calculated | Protocol ID 0x4009 |
| power.on.status | boolean | Power-on device status | Protocol ID 0x4007 with Alarm Type 0x09, Protocol ID 0x4007 with Alarm Type 0x0E, Protocol ID 0x401F with Alarm Type 0x09, Protocol ID 0x401F with Alarm Type 0x0E | |
| private.status | boolean | Device is in private mode | ||
| protocol.id | number | ID of protocol | ||
| quick.lane.change.event | boolean | Quick lane change status | Protocol ID 0x4007 with Alarm Type 0x0B, Protocol ID 0x401F with Alarm Type 0x0B | |
| rfid.code | string | Hexadecimal code of connected RFID | Protocol ID 0x400D | |
| sample.rate | number | seconds | Sample rate of accelerometer data | Protocol ID 0x4003 |
| server.timestamp | number | seconds | Timestamp when server received a message | |
| software.version | string | Software version string | Protocol ID 0x1001 | |
| tamper.alarm | boolean | Tamper alarm event | Protocol ID 0x4007 with Alarm Type 0x12, Protocol ID 0x401F with Alarm Type 0x12 | |
| timestamp | number | seconds | Message timestamp | Protocol ID 0x1001, Protocol ID 0x1002, Protocol ID 0x4001, Protocol ID 0x4002, Protocol ID 0x4003, Protocol ID 0x4004, Protocol ID 0x4005, Protocol ID 0x4006, Protocol ID 0x4007, Protocol ID 0x4008, Protocol ID 0x4009, Protocol ID 0x400B, Protocol ID 0x400C, Protocol ID 0x400D, Protocol ID 0x401F |
| total.fuel.consumed | number | liters | Total fuel consumption from device power on to the latest ACC ON time | Protocol ID 0x1001, Protocol ID 0x1002, Protocol ID 0x4001, Protocol ID 0x4002, Protocol ID 0x4003, Protocol ID 0x4004, Protocol ID 0x4005, Protocol ID 0x4006, Protocol ID 0x4007, Protocol ID 0x4008, Protocol ID 0x400B, Protocol ID 0x400C, Protocol ID 0x400D, Protocol ID 0x401F |
| total.trip.mileage | number | km | Total trip mileage | Protocol ID 0x1001, Protocol ID 0x1002, Protocol ID 0x4001, Protocol ID 0x4002, Protocol ID 0x4003, Protocol ID 0x4004, Protocol ID 0x4005, Protocol ID 0x4006, Protocol ID 0x4007, Protocol ID 0x4008, Protocol ID 0x400B, Protocol ID 0x400C, Protocol ID 0x400D, Protocol ID 0x401F |
| towing.event | boolean | Towing event detected | Protocol ID 0x4007 with Alarm Type 0x07, Protocol ID 0x401F with Alarm Type 0x07 | |
| trip.mileage | number | km | Distance driven since engine start | PID 0x00F4, PID 0x22C2 |
| turn.left.status | boolean | Turn left status | Protocol ID 0xB007 | |
| turn.right.status | boolean | Turn right status | Protocol ID 0xB007 | |
| unlock.event | boolean | Unlock event | Protocol ID 0x4007 with Alarm Type 0x19, Protocol ID 0x401F with Alarm Type 0x19 | |
| vehicle.state | string | Vehicle state, such as moving, idling, parked etc | PID 0x22E2 | |
| vehicle.vin | string | VIN of vehicle | Protocol ID 0xA002 | |
| vibration.alarm | boolean | Vibration alarm event | Protocol ID 0x4007 with Alarm Type 0x1C, Protocol ID 0x401F with Alarm Type 0x1C | |
| voltage.low.status | boolean | Low voltage | Protocol ID 0x4007 with Alarm Type 0x02, Protocol ID 0x401F with Alarm Type 0x02 |