| Parameter | Type | Unit | Description | Sources |
|---|---|---|---|---|
| adas.alert.id | number | ID of the alert generated by Advanced driver-assistance system (ADAS) | Command ID 0x01 with IO ID 716, Command ID 0x01 with IO ID 717, Command ID 0x44 with IO ID 716, Command ID 0x44 with IO ID 717 | |
| adas.fatigue.alert | number | ADAS fatigue alert type 0 - no alert, 1 - fatigue alert, 2 - distraction alert, 3 - no portrait alert | Command ID 0x01 with IO ID 716, Command ID 0x44 with IO ID 716 | |
| adas.snapshots.count | number | Number of fatigue sensor snapshots done since the last record was generated | Command ID 0x01 with IO ID 718, Command ID 0x44 with IO ID 718 | |
| adas.snapshot.source | number | Source ID of fatigue snapshot file | Command ID 0x01 with IO ID 717, Command ID 0x44 with IO ID 717 | |
| adas.snapshot.timestamp | number | Fatigue snapshot file timestamp when the picture was taken | Command ID 0x01 with IO ID 717, Command ID 0x44 with IO ID 717 | |
| ain | number | volts | Voltage on the analog input | Command ID 0x01 with IO ID 20...21, Command ID 0x01 with IO ID 22, Command ID 0x01 with IO ID 23, Command ID 0x44 with IO ID 20...21, Command ID 0x44 with IO ID 22, Command ID 0x44 with IO ID 23 |
| ain.event | boolean | AIN event | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| alarm.panic.status | boolean | Panic alarm event occurred | Command ID 0x01 with IO ID 558, Command ID 0x44 with IO ID 558 | |
| antihijack.bitmask | number | Antihijack status bitmask | Command ID 0x01 with IO ID 850, Command ID 0x44 with IO ID 850 | |
| auto.geofence.alert | boolean | Auto-geofence alert | Command ID 0x01 with IO ID 739, Command ID 0x44 with IO ID 739 | |
| average.x.acceleration | number | g | Harsh acceleration event average accelerometer value on X-axis | Command ID 0x01 with IO ID 755, Command ID 0x44 with IO ID 755 |
| average.y.acceleration | number | g | Harsh acceleration event average accelerometer value on Y-axis | Command ID 0x01 with IO ID 756, Command ID 0x44 with IO ID 756 |
| average.z.acceleration | number | g | Harsh acceleration event average accelerometer value on Z-axis | Command ID 0x01 with IO ID 757, Command ID 0x44 with IO ID 757 |
| battery.current | number | amperes | Battery current | Command ID 0x01 with IO ID 170, Command ID 0x44 with IO ID 170 |
| battery.health | number | percentage | Battery health level (SoH) | Command ID 0x01 with IO ID 950, Command ID 0x44 with IO ID 950 |
| battery.voltage | number | volts | Internal battery voltage | Command ID 0x01 with IO ID 30, Command ID 0x44 with IO ID 30 |
| ble.asset.battery.level | number | percentage | BLE (Bluetooth Low Energy) asset battery level | Command ID 0x01 with IO ID 764...768, Command ID 0x44 with IO ID 764...768 |
| ble.asset.battery.voltage | number | volts | BLE (Bluetooth Low Energy) asset battery voltage | Command ID 0x01 with IO ID 769...773, Command ID 0x44 with IO ID 769...773 |
| ble.beacons | array | Standard parameter names used: *id* - beacon identification string. Usually it is beacon's UUID or MAC-address *local_name* - Beacons's Local Name *rssi* - BLE signal level. Units = dBm *battery.voltage* - Beacon's battery voltage. Units = volts *battery.level* - Beacon's battery level. Units = percentage *temperature* - Beacon's temperature. Units = celsius |
Command ID 0x26 | |
| ble.sensor.humidity | number | percentage | BLE (Bluetooth Low Energy) sensor Humidity value | Command ID 0x01 with IO ID 605...609, Command ID 0x44 with IO ID 605...609 |
| ble.sensor.status | boolean | BLE (Bluetooth Low Energy) sensor status, active - true, inactive - false | Command ID 0x01 with IO ID 774...778, Command ID 0x44 with IO ID 774...778 | |
| ble.sensor.temperature | number | celsius | BLE (Bluetooth Low Energy) sensor Temperature value | Command ID 0x01 with IO ID 600...604, Command ID 0x44 with IO ID 600...604 |
| ble.sensor.value | number | BLE (Bluetooth Low Energy) sensor value, depends on actual sensor type | Command ID 0x01 with IO ID 779...783, Command ID 0x44 with IO ID 779...783 | |
| calibration.matrix.index | number | Calibration matrix index, indexed parameter | Command ID 0x23 | |
| can.adblue.level | number | percentage | AdBlue (diesel exhaust fluid) level read from CAN | Command ID 0x01 with IO ID 201, Command ID 0x44 with IO ID 201 |
| can.air.suspension.control | number | Air suspension control bitmap from CAN bus | Command ID 0x01 with IO ID 401, Command ID 0x44 with IO ID 401 | |
| can.alternator.error | boolean | Alternator error, read from CAN, indexed parameter, possible indexes from 1 to 4 | Command ID 0x01 with IO ID 400, Command ID 0x44 with IO ID 400 | |
| can.alternator.status | boolean | Alternator charging status read from CAN, false - not charging, true - charging, indexed parameter, possible indexes from 1 to 4 | Command ID 0x01 with IO ID 400, Command ID 0x44 with IO ID 400 | |
| can.ambient.air.temperature | number | celsius | CAN ambient air temperature | Command ID 0x01 with IO ID 89, Command ID 0x01 with IO ID 927, Command ID 0x01 with IO ID 97, Command ID 0x44 with IO ID 89, Command ID 0x44 with IO ID 927, Command ID 0x44 with IO ID 97 |
| can.axle.weight | number | kg | Weight on the axle read from CAN | Command ID 0x01 with IO ID 41, Command ID 0x01 with IO ID 52...55, Command ID 0x44 with IO ID 41, Command ID 0x44 with IO ID 52...55 |
| can.brake.pedal.level | number | percentage | Brake pedal push level read from CAN | Command ID 0x01 with IO ID 482, Command ID 0x44 with IO ID 482 |
| can.central.lock.status | boolean | CAN central lock is locked | Command ID 0x01 with IO ID 538, Command ID 0x44 with IO ID 538 | |
| can.configuration.bitmask | number | CAN interface configuration bitmask | Command ID 0x01 with IO ID 574, Command ID 0x44 with IO ID 574 | |
| can.cruise.status | boolean | CAN cruise control is active | Command ID 0x01 with IO ID 37, Command ID 0x44 with IO ID 37 | |
| can.diagnostic.support.enum | number | CAN diagnostics supported bitmask | Command ID 0x01 with IO ID 11, Command ID 0x44 with IO ID 11 | |
| can.diagnostic.troublecode.mil.bitmask | number | Diagnostic Trouble Code and Malfunction Indicator Lamp bitmask read from CAN | Command ID 0x01 with IO ID 93, Command ID 0x44 with IO ID 93 | |
| can.diesel.exhaust.fluid.level | number | percentage | Aftertreatment diesel exhaust fluid level read from CAN | Command ID 0x01 with IO ID 357, Command ID 0x44 with IO ID 357 |
| can.dtc | array | Diagnostic trouble code array read from CAN May content list of OBDII codes or list of objects with codes. Standard object parameter names used: *standard* - Protocol standard (J1939, J1708(J1587), OBDII) *mid* - Message Identifier (J1708) *sid* - Subsystem Identifier (J1708) *fmi* - Failure Mode Identifier (J1939, J1708) *spn* - Suspect Parameter Number (J1939) *sa* - Source Address (J1939, OBDII) *oc* - Occurrence Count (J1939) *cm* - Conversion Method (J1939) *status* - Status of error code (active, pending, historical, permanent) |
Command ID 0x09 | |
| can.dtc.indication.lights | number | DTC indication lights read from CAN | Command ID 0x01 with IO ID 626, Command ID 0x44 with IO ID 626 | |
| can.engine.braking.factor | number | Engine braking factor value, read from CAN | Command ID 0x01 with IO ID 31, Command ID 0x44 with IO ID 31 | |
| can.engine.coolant.temperature | number | celsius | Engine coolant temperature read from CAN | Command ID 0x01 with IO ID 926, Command ID 0x01 with IO ID 96, Command ID 0x44 with IO ID 926, Command ID 0x44 with IO ID 96 |
| can.engine.fuel.rate | number | liters/h | Engine fuel rate read from CAN | Command ID 0x01 with IO ID 100, Command ID 0x01 with IO ID 116, Command ID 0x44 with IO ID 100, Command ID 0x44 with IO ID 116 |
| can.engine.ignition.status | boolean | CAN engine ignition status | Command ID 0x01 with IO ID 522, Command ID 0x44 with IO ID 522 | |
| can.engine.load.level | number | percentage | Calculated engine load level read from CAN | Command ID 0x01 with IO ID 101, Command ID 0x01 with IO ID 39, Command ID 0x01 with IO ID 519, Command ID 0x44 with IO ID 101, Command ID 0x44 with IO ID 39, Command ID 0x44 with IO ID 519 |
| can.engine.motorhours | number | hours | Total engine motorhours (engine work time) read from CAN | Command ID 0x01 with IO ID 203, Command ID 0x44 with IO ID 203 |
| can.engine.rpm | number | rpm | Engine RPM read from CAN | Command ID 0x01 with IO ID 197, Command ID 0x01 with IO ID 920, Command ID 0x01 with IO ID 94, Command ID 0x44 with IO ID 197, Command ID 0x44 with IO ID 920, Command ID 0x44 with IO ID 94 |
| can.engine.run.time | number | seconds | Run time since engine start read from CAN | Command ID 0x01 with IO ID 107, Command ID 0x44 with IO ID 107 |
| can.engine.temperature | number | celsius | Engine temperature read from CAN | Command ID 0x01 with IO ID 115, Command ID 0x44 with IO ID 115 |
| can.first.driver.card.id | number | CAN first driver ID | Command ID 0x01 with IO ID 126, Command ID 0x01 with IO ID 127, Command ID 0x44 with IO ID 126, Command ID 0x44 with IO ID 127 | |
| can.fms.axle.location.enum | number | CAN axle location according FMS standard | Command ID 0x01 with IO ID 219, Command ID 0x44 with IO ID 219 | |
| can.fms.software.version.bitmask | number | CAN FMS software version supported bitmask | Command ID 0x01 with IO ID 12, Command ID 0x44 with IO ID 12 | |
| can.fms.tire.location.enum | number | CAN tire location according FMS standard | Command ID 0x01 with IO ID 40, Command ID 0x44 with IO ID 40 | |
| can.front.left.door.status | boolean | CAN front left door is opened | Command ID 0x01 with IO ID 518, Command ID 0x44 with IO ID 518 | |
| can.front.right.door.status | boolean | CAN front right door is opened | Command ID 0x01 with IO ID 518, Command ID 0x44 with IO ID 518 | |
| can.fuel.consumed | number | liters | Fuel volume totally consumed by vehicle read from CAN | Command ID 0x01 with IO ID 208, Command ID 0x01 with IO ID 408, Command ID 0x01 with IO ID 754, Command ID 0x44 with IO ID 208, Command ID 0x44 with IO ID 408, Command ID 0x44 with IO ID 754 |
| can.fuel.consumed.high.resolution | number | liters | Fuel volume totally consumed by vehicle calculated with high resolution (HRLFC), read from CAN | Command ID 0x01 with IO ID 92, Command ID 0x44 with IO ID 92 |
| can.fuel.consumption | number | liters/h | Engine fuel rate read from CAN | Command ID 0x01 with IO ID 925, Command ID 0x44 with IO ID 925 |
| can.fuel.consumption.distance | number | liters/100km | Fuel consumption read from CAN | Command ID 0x01 with IO ID 407, Command ID 0x44 with IO ID 407 |
| can.fuel.economy | number | km/liters | CAN instantaneous fuel economy | Command ID 0x01 with IO ID 90, Command ID 0x44 with IO ID 90 |
| can.fuel.level | number | percentage | Fuel level in tank read from CAN | Command ID 0x01 with IO ID 207, Command ID 0x01 with IO ID 481, Command ID 0x01 with IO ID 530, Command ID 0x01 with IO ID 923, Command ID 0x01 with IO ID 98, Command ID 0x44 with IO ID 207, Command ID 0x44 with IO ID 481, Command ID 0x44 with IO ID 530, Command ID 0x44 with IO ID 923, Command ID 0x44 with IO ID 98 |
| can.fuel.type.enum | number | Fuel type read from CAN | Command ID 0x01 with IO ID 483, Command ID 0x01 with IO ID 99, Command ID 0x44 with IO ID 483, Command ID 0x44 with IO ID 99 | |
| can.fuel.volume | number | liters | CAN fuel volume | Command ID 0x01 with IO ID 205, Command ID 0x01 with IO ID 642, Command ID 0x01 with IO ID 924, Command ID 0x44 with IO ID 205, Command ID 0x44 with IO ID 642, Command ID 0x44 with IO ID 924 |
| can.gas.fuel.consumed | number | kg | Natural gas fuel amount totally consumed by vehicle read from CAN | Command ID 0x01 with IO ID 484, Command ID 0x44 with IO ID 484 |
| can.gross.combination.vehicle.weight | number | kg | Gross combination vehicle weight read from CAN | Command ID 0x01 with IO ID 358, Command ID 0x44 with IO ID 358 |
| can.handbrake.status | boolean | CAN handbrake is pulled up | Command ID 0x01 with IO ID 362, Command ID 0x44 with IO ID 362 | |
| can.hood.status | boolean | CAN hood is opened | Command ID 0x01 with IO ID 518, Command ID 0x44 with IO ID 518 | |
| can.intake.air.temperature | number | celsius | Intake air temperature | Command ID 0x01 with IO ID 587, Command ID 0x44 with IO ID 587 |
| can.j1939.cargo.weight | number | kg | CAN J1939 cargo weight | Command ID 0x01 with IO ID 214, Command ID 0x44 with IO ID 214 |
| can.j1939.trailer.weight | number | kg | CAN J1939 trailer weight | Command ID 0x01 with IO ID 202, Command ID 0x44 with IO ID 202 |
| can.lvc.module.control.bitmask | number | LVC control state flags | Command ID 0x01 with IO ID 573, Command ID 0x44 with IO ID 573 | |
| can.maintenance.before.engine.hours | number | hours | Engine hours before the next maintenance, read from CAN | Command ID 0x01 with IO ID 520, Command ID 0x44 with IO ID 520 |
| can.maintenance.before.mileage | number | km | Mileage before next maintenance read from CAN | Command ID 0x01 with IO ID 204, Command ID 0x44 with IO ID 204 |
| can.manufacturer.enum | number | Manufacturer code read from CAN | Command ID 0x01 with IO ID 644, Command ID 0x44 with IO ID 644 | |
| can.mil.mileage | number | km | Distance traveled while malfunction indicator lamp is activated, read from CAN | Command ID 0x01 with IO ID 102, Command ID 0x44 with IO ID 102 |
| can.movement.status | boolean | Movement state read from CAN bus | Command ID 0x01 with IO ID 13, Command ID 0x44 with IO ID 13 | |
| can.one.powersource.takeoff.enum | number | CAN at least one PTO engaged | Command ID 0x01 with IO ID 91, Command ID 0x44 with IO ID 91 | |
| can.pedal.brake.status | boolean | Footbrake pedal is depressed, read from CAN | Command ID 0x01 with IO ID 36, Command ID 0x44 with IO ID 36 | |
| can.pedal.clutch.status | boolean | CAN clutch pedal pressed | Command ID 0x01 with IO ID 35, Command ID 0x44 with IO ID 35 | |
| can.powersource.takeoff.enum | number | CAN power takeoff bitmask | Command ID 0x01 with IO ID 38, Command ID 0x44 with IO ID 38 | |
| can.rear.left.door.status | boolean | CAN rear left door is opened | Command ID 0x01 with IO ID 518, Command ID 0x44 with IO ID 518 | |
| can.rear.right.door.status | boolean | CAN rear right door is opened | Command ID 0x01 with IO ID 518, Command ID 0x44 with IO ID 518 | |
| can.request.support.enum | number | CAN requests supported bitmask | Command ID 0x01 with IO ID 10, Command ID 0x44 with IO ID 10 | |
| can.retarder.selection | number | percentage | Retarder selection read from CAN | Command ID 0x01 with IO ID 361, Command ID 0x44 with IO ID 361 |
| can.retarder.torque.load | number | percentage | Retarder torque load percentage read from CAN | Command ID 0x01 with IO ID 360, Command ID 0x44 with IO ID 360 |
| can.retarder.torque.mode | number | Retarder torque mode read from CAN | Command ID 0x01 with IO ID 359, Command ID 0x44 with IO ID 359 | |
| can.seatbelt.status | boolean | Seatbelt status read from CAN, false - the belt is not buckled, true - the belt is buckled | Command ID 0x01 with IO ID 109, Command ID 0x44 with IO ID 109 | |
| can.secondary.driver.card.id | number | CAN second driver ID | Command ID 0x01 with IO ID 128, Command ID 0x01 with IO ID 129, Command ID 0x44 with IO ID 128, Command ID 0x44 with IO ID 129 | |
| can.secondary.fuel.level | number | percentage | CAN engine fuel level secondary | Command ID 0x01 with IO ID 209, Command ID 0x44 with IO ID 209 |
| can.service.brake.air.pressure | number | kPa | Service brake air pressure circuit | Command ID 0x01 with IO ID 355, Command ID 0x01 with IO ID 356, Command ID 0x44 with IO ID 355, Command ID 0x44 with IO ID 356 |
| can.system.event.enum | number | CAN system event enum | Command ID 0x01 with IO ID 42, Command ID 0x44 with IO ID 42 | |
| can.tacho.driver.activity.enum | number | CAN tacho driver activity state | Command ID 0x01 with IO ID 215, Command ID 0x01 with IO ID 216, Command ID 0x44 with IO ID 215, Command ID 0x44 with IO ID 216 | |
| can.tacho.driver.card.enum | number | CAN tacho driver card status enum | Command ID 0x01 with IO ID 15, Command ID 0x01 with IO ID 17, Command ID 0x44 with IO ID 15, Command ID 0x44 with IO ID 17 | |
| can.tacho.driver.time.enum | number | CAN tacho driver 1 time related status | Command ID 0x01 with IO ID 14, Command ID 0x01 with IO ID 16, Command ID 0x44 with IO ID 14, Command ID 0x44 with IO ID 16 | |
| can.tacho.handling.info.status | boolean | CAN tacho handling information | Command ID 0x01 with IO ID 43, Command ID 0x44 with IO ID 43 | |
| can.tacho.overspeeding.event | boolean | CAN tacho vehicle overspeed | Command ID 0x01 with IO ID 218, Command ID 0x44 with IO ID 218 | |
| can.tacho.performance.enum | number | CAN tachograph performance | Command ID 0x01 with IO ID 217, Command ID 0x44 with IO ID 217 | |
| can.tacho.position.speed | number | km/h | CAN tachograph vehicle speed | Command ID 0x01 with IO ID 213, Command ID 0x44 with IO ID 213 |
| can.tacho.reverse.movement.status | boolean | CAN tacho direction indicator | Command ID 0x01 with IO ID 44, Command ID 0x44 with IO ID 44 | |
| can.throttle.pedal.level | number | percentage | Throttle pedal push level read from CAN | Command ID 0x01 with IO ID 103, Command ID 0x01 with IO ID 206, Command ID 0x01 with IO ID 928, Command ID 0x44 with IO ID 103, Command ID 0x44 with IO ID 206, Command ID 0x44 with IO ID 928 |
| can.trunk.status | boolean | CAN trunk is opened | Command ID 0x01 with IO ID 518, Command ID 0x44 with IO ID 518 | |
| can.vehicle.battery.capacity | number | Wh | Vehicle battery capacity get from CAN bus | Command ID 0x01 with IO ID 521, Command ID 0x44 with IO ID 521 |
| can.vehicle.battery.charging.status | boolean | Vehicle battery charging status get from CAN Bus | Command ID 0x01 with IO ID 517, Command ID 0x44 with IO ID 517 | |
| can.vehicle.battery.level | number | percentage | CAN-bus reported vehicle battery level for EV or HEV | Command ID 0x01 with IO ID 515, Command ID 0x01 with IO ID 722, Command ID 0x44 with IO ID 515, Command ID 0x44 with IO ID 722 |
| can.vehicle.id | string | CAN vehicle ID | Command ID 0x01 with IO ID 123, Command ID 0x01 with IO ID 124, Command ID 0x01 with IO ID 125, Command ID 0x44 with IO ID 123, Command ID 0x44 with IO ID 124, Command ID 0x44 with IO ID 125 | |
| can.vehicle.mileage | number | km | Total vehicle mileage read from CAN | Command ID 0x01 with IO ID 645, Command ID 0x01 with IO ID 922, Command ID 0x44 with IO ID 645, Command ID 0x44 with IO ID 922 |
| can.vehicle.mileage.high.resolution | number | km | Total vehicle mileage calculated with high resolution (VDHR), read from CAN | Command ID 0x01 with IO ID 114, Command ID 0x44 with IO ID 114 |
| can.vehicle.remaining.distance | number | km | Remaining electrical vehicle driving distance in kilometers read from CAN | Command ID 0x01 with IO ID 516, Command ID 0x01 with IO ID 723, Command ID 0x44 with IO ID 516, Command ID 0x44 with IO ID 723 |
| can.vehicle.speed | number | km/h | Vehicle speed read from CAN | Command ID 0x01 with IO ID 921, Command ID 0x01 with IO ID 95, Command ID 0x44 with IO ID 921, Command ID 0x44 with IO ID 95 |
| can.wheel.speed | number | km/h | Vehicle wheel based speed, read from CAN bus | Command ID 0x01 with IO ID 210, Command ID 0x44 with IO ID 210 |
| channel.id | number | ID of channel that received a message | ||
| config.engine.ignition.status | boolean | Custom configured engine ignition status | Command ID 0x01 with IO ID 409, Command ID 0x44 with IO ID 409 | |
| counter.din.cumulative.hours | number | hours | Digital input hour counter. The seconds are cumulated and not reset on new record. | Command ID 0x01 with IO ID 577...580, Command ID 0x44 with IO ID 577...580 |
| counter.din.hours | number | hours | Digital input hour counter. The counter is reset on every new record. | Command ID 0x01 with IO ID 45...48, Command ID 0x44 with IO ID 45...48 |
| counter.fuel.value | number | Fuel counter | Command ID 0x01 with IO ID 18...19, Command ID 0x01 with IO ID 20...21, Command ID 0x44 with IO ID 18...19, Command ID 0x44 with IO ID 20...21 | |
| crash.event | boolean | Crash event detected | Command ID 0x01 with IO ID 805, Command ID 0x44 with IO ID 805 | |
| crash.impact.acceleration | number | g | Crash impact acceleration | Command ID 0x01 with IO ID 412, Command ID 0x44 with IO ID 412 |
| crash.impact.direction | number | degrees | Crash impact direction | Command ID 0x01 with IO ID 412, Command ID 0x44 with IO ID 412 |
| custom | any | Any custom parameter | ||
| device.configuration.id | number | Configuration profile index | Command ID 0x01 with IO ID 28, Command ID 0x44 with IO ID 28 | |
| device.id | number | ID of device that received a message | ||
| device.name | string | Name of device that received a message | ||
| device.temperature | number | celsius | Temperature of device | Command ID 0x01 with IO ID 6, Command ID 0x44 with IO ID 6 |
| device.type.id | number | ID of device type of device that received a message | ||
| device.uptime | number | seconds | Time in seconds since last device power on | Command ID 0x01 with IO ID 525, Command ID 0x44 with IO ID 525 |
| din | number | Digital inputs bitmask | Command ID 0x01 with IO ID 2...5, Command ID 0x44 with IO ID 2...5 | |
| din.high.event | boolean | DIN high event | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| din.low.event | boolean | DIN low event | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| dout | number | Digital outputs bitmask | Command ID 0x01 with IO ID 111...112, Command ID 0x01 with IO ID 405, Command ID 0x01 with IO ID 406, Command ID 0x44 with IO ID 111...112, Command ID 0x44 with IO ID 405, Command ID 0x44 with IO ID 406 | |
| driver.id | string | Driver identification card id | Command ID 0x01, Command ID 0x01 with IO ID 760, Command ID 0x01 with IO ID 761, Command ID 0x44, Command ID 0x44 with IO ID 760, Command ID 0x44 with IO ID 761 | |
| driver.registration.status | boolean | Driver registration status | Command ID 0x01 with IO ID 630, Command ID 0x44 with IO ID 630 | |
| ds1971.driver.ibutton.code | string | DS1971 iButton internal 16B driver ID | Command ID 0x01 with IO ID 621, Command ID 0x01 with IO ID 622, Command ID 0x44 with IO ID 621, Command ID 0x44 with IO ID 622 | |
| dtc.latitude | number | degrees | Latitude of diagnostic trouble code | Command ID 0x09 |
| dtc.longitude | number | degrees | Longitude of diagnostic trouble code | Command ID 0x09 |
| dtc.source | number | Source of diagnostic trouble code 0xFF - OBD, 0x1 - CAN j1939, 0x02 - CAN j1708 | Command ID 0x09 | |
| dtc.status | number | Status of diagnostic trouble code 1 - current, 2 - historical | Command ID 0x09 | |
| dtc.timestamp | number | seconds | Timestamp of diagnostic trouble code | Command ID 0x09 |
| eco.driving.pedal.fuel.ranges | number | ECO Accelerator pedal position fuel used ranges | Command ID 0x01 with IO ID 748, Command ID 0x44 with IO ID 748 | |
| eco.driving.rpm.distance.ranges | number | meters | ECO RPM driven distance ranges | Command ID 0x01 with IO ID 747, Command ID 0x44 with IO ID 747 |
| eco.driving.rpm.fuel.ranges | number | liters | ECO RPM fuel used ranges | Command ID 0x01 with IO ID 751, Command ID 0x44 with IO ID 751 |
| eco.driving.stops.count | number | ECO Number of vehicle stops | Command ID 0x01 with IO ID 526, Command ID 0x44 with IO ID 526 | |
| eco.engine.braking.distance | number | km | ECO engine braking distance | Command ID 0x01 with IO ID 597, Command ID 0x01 with IO ID 878, Command ID 0x44 with IO ID 597, Command ID 0x44 with IO ID 878 |
| event.id | number | ID of event that caused record generation | Command ID 0x01, Command ID 0x44 | |
| event.seqnum | number | Unique event sequence number | Command ID 0x01, Command ID 0x44 | |
| external.powersource.current | number | External supply current | Command ID 0x01 with IO ID 957, Command ID 0x44 with IO ID 957 | |
| external.powersource.voltage | number | volts | External power voltage | Command ID 0x01 with IO ID 29, Command ID 0x44 with IO ID 29 |
| extnav.position.altitude | number | meters | Altitude value for external receiver position | Command ID 0x01 with IO ID 419, Command ID 0x44 with IO ID 419 |
| fuel.consumed | number | liters | Fuel volume totally consumed by vehicle | Command ID 0x01 with IO ID 789...793, Command ID 0x44 with IO ID 789...793 |
| fuel.sensor.a1.temperature | number | celsius | Digital fuel level sensor A1 tempterature | Command ID 0x01 with IO ID 212, Command ID 0x44 with IO ID 212 |
| fuel.sensor.a1.value | number | Digital fuel level sensor A1 value expressed in normalized units (N) | Command ID 0x01 with IO ID 211, Command ID 0x44 with IO ID 211 | |
| fuel.sensor.b1.temperature | number | celsius | Digital fuel level sensor B1 tempterature | Command ID 0x01 with IO ID 76, Command ID 0x44 with IO ID 76 |
| fuel.sensor.b1.value | number | Digital fuel level sensor B1 value expressed in normalized units (N) | Command ID 0x01 with IO ID 67, Command ID 0x44 with IO ID 67 | |
| fuel.sensor.c10.temperature | number | celsius | Digital fuel level sensor C10 tempterature | Command ID 0x01 with IO ID 75, Command ID 0x44 with IO ID 75 |
| fuel.sensor.c10.value | number | Digital fuel level sensor C10 value expressed in normalized units (N) | Command ID 0x01 with IO ID 87, Command ID 0x44 with IO ID 87 | |
| fuel.sensor.c1.temperature | number | celsius | Digital fuel level sensor C1 tempterature | Command ID 0x01 with IO ID 56, Command ID 0x44 with IO ID 56 |
| fuel.sensor.c1.value | number | Digital fuel level sensor C1 value expressed in normalized units (N) | Command ID 0x01 with IO ID 66, Command ID 0x44 with IO ID 66 | |
| fuel.sensor.c2.temperature | number | celsius | Digital fuel level sensor C2 tempterature | Command ID 0x01 with IO ID 57, Command ID 0x44 with IO ID 57 |
| fuel.sensor.c2.value | number | Digital fuel level sensor C2 value expressed in normalized units (N) | Command ID 0x01 with IO ID 68, Command ID 0x44 with IO ID 68 | |
| fuel.sensor.c3.temperature | number | celsius | Digital fuel level sensor C3 tempterature | Command ID 0x01 with IO ID 58, Command ID 0x44 with IO ID 58 |
| fuel.sensor.c3.value | number | Digital fuel level sensor C3 value expressed in normalized units (N) | Command ID 0x01 with IO ID 69, Command ID 0x44 with IO ID 69 | |
| fuel.sensor.c4.temperature | number | celsius | Digital fuel level sensor C4 tempterature | Command ID 0x01 with IO ID 59, Command ID 0x44 with IO ID 59 |
| fuel.sensor.c4.value | number | Digital fuel level sensor C4 value expressed in normalized units (N) | Command ID 0x01 with IO ID 81, Command ID 0x44 with IO ID 81 | |
| fuel.sensor.c5.temperature | number | celsius | Digital fuel level sensor C5 tempterature | Command ID 0x01 with IO ID 60, Command ID 0x44 with IO ID 60 |
| fuel.sensor.c5.value | number | Digital fuel level sensor C5 value expressed in normalized units (N) | Command ID 0x01 with IO ID 82, Command ID 0x44 with IO ID 82 | |
| fuel.sensor.c6.temperature | number | celsius | Digital fuel level sensor C6 tempterature | Command ID 0x01 with IO ID 61, Command ID 0x44 with IO ID 61 |
| fuel.sensor.c6.value | number | Digital fuel level sensor C6 value expressed in normalized units (N) | Command ID 0x01 with IO ID 83, Command ID 0x44 with IO ID 83 | |
| fuel.sensor.c7.temperature | number | celsius | Digital fuel level sensor C7 tempterature | Command ID 0x01 with IO ID 62, Command ID 0x44 with IO ID 62 |
| fuel.sensor.c7.value | number | Digital fuel level sensor C7 value expressed in normalized units (N) | Command ID 0x01 with IO ID 84, Command ID 0x44 with IO ID 84 | |
| fuel.sensor.c8.temperature | number | celsius | Digital fuel level sensor C8 tempterature | Command ID 0x01 with IO ID 63, Command ID 0x44 with IO ID 63 |
| fuel.sensor.c8.value | number | Digital fuel level sensor C8 value expressed in normalized units (N) | Command ID 0x01 with IO ID 85, Command ID 0x44 with IO ID 85 | |
| fuel.sensor.c9.temperature | number | celsius | Digital fuel level sensor C9 tempterature | Command ID 0x01 with IO ID 64, Command ID 0x44 with IO ID 64 |
| fuel.sensor.c9.value | number | Digital fuel level sensor C9 value expressed in normalized units (N) | Command ID 0x01 with IO ID 86, Command ID 0x44 with IO ID 86 | |
| fuel.sensor.frequency | number | hz | DUT-E S7 frequency | Command ID 0x01 with IO ID 784...788, Command ID 0x44 with IO ID 784...788 |
| garmin.payload.hex | string | Garmin payload in hex | Command ID 0x1F | |
| garmin.status | boolean | Garmin FMI module status | Command ID 0x1E | |
| geofence.enetered.event | boolean | Device entered geofence event | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| geofence.group.id | number | Geofence group ID | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| geofence.id | number | Geofence ID | Command ID 0x01 with IO ID 151, Command ID 0x01 with IO ID 651, Command ID 0x44 with IO ID 151, Command ID 0x44 with IO ID 651 | |
| geofence.left.event | boolean | Device left geofence event | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| geofence.overspeeding.status | boolean | Geofence overspeeding status | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| geofence.status | boolean | Geofence entered status | Command ID 0x01 with IO ID 151, Command ID 0x01 with IO ID 651, Command ID 0x44 with IO ID 151, Command ID 0x44 with IO ID 651 | |
| geofence.valid | boolean | Geofence reliablity flag | Command ID 0x01 with IO ID 151, Command ID 0x44 with IO ID 151 | |
| gnss.antenna.status | boolean | GNSS receiver antenna status | Command ID 0x01 with IO ID 415, Command ID 0x44 with IO ID 415 | |
| gnss.antenna.type | number | GNSS antenna type 0 - internal, 1 - external | Command ID 0x01 with IO ID 759, Command ID 0x44 with IO ID 759 | |
| gnss.fix.duration | number | seconds | Time used to fetch device GNSS position ("Time to GPS fix") | Command ID 0x01 with IO ID 5005, Command ID 0x44 with IO ID 5005 |
| gnss.state.enum | number | Protocol-specific GNSS state code. May contain information about GNSS fix status, sleep status, ON/OFF, Overcurrent/protect state. | Command ID 0x07 | |
| gprs.status | boolean | GPRS mobile network status | Command ID 0x01 with IO ID 418, Command ID 0x44 with IO ID 418 | |
| gsm.cellid | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID | Command ID 0x01 with IO ID 852, Command ID 0x44 with IO ID 852 | |
| gsm.jamming.event | boolean | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal jamming detected | Command ID 0x01 with IO ID 88, Command ID 0x44 with IO ID 88 | |
| gsm.lac | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code | Command ID 0x01 with IO ID 851, Command ID 0x44 with IO ID 851 | |
| gsm.mcc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code | Command ID 0x01 with IO ID 150, Command ID 0x0F, Command ID 0x44 with IO ID 150 | |
| gsm.mnc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code | Command ID 0x01 with IO ID 150, Command ID 0x0F, Command ID 0x44 with IO ID 150 | |
| gsm.network.type | string | The type of the Mobile network the device is currently registered to | Command ID 0x01 with IO ID 762, Command ID 0x44 with IO ID 762 | |
| gsm.operator.code | string | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) operator code, which is MCC joined with MNC | Command ID 0x01 with IO ID 150, Command ID 0x0F, Command ID 0x44 with IO ID 150 | |
| gsm.signal.dbm | number | dbm | Strength of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal | Command ID 0x01 with IO ID 27, Command ID 0x44 with IO ID 27 |
| gsm.sim.imsi | string | IMSI of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Command ID 0x0F | |
| gsm.state.enum | number | Mobile network module state | Command ID 0x01 with IO ID 763, Command ID 0x44 with IO ID 763 | |
| gsm.state.enum.description | string | Mobile network module state description | Command ID 0x01 with IO ID 763, Command ID 0x44 with IO ID 763 | |
| gsm.troublecode.bitmask | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) trouble codes | Command ID 0x01 with IO ID 560, Command ID 0x44 with IO ID 560 | |
| ibutton.code | string | Hexadecimal code of connected iButton | Command ID 0x01 with IO ID 34, Command ID 0x44 with IO ID 34 | |
| ident | string | Device unique identifier like serial number, IMEI, etc | ||
| idle.status | boolean | Vehicle is in idling state | Command ID 0x01 with IO ID 169, Command ID 0x44 with IO ID 169 | |
| idle.status.duration | number | seconds | Duration of vehicle being in the last idling state | Command ID 0x01 with IO ID 137, Command ID 0x01 with IO ID 876, Command ID 0x44 with IO ID 137, Command ID 0x44 with IO ID 876 |
| image.count | number | Indicates how many snapshots were done since last record and were stored in SD card | Command ID 0x01 with IO ID 652, Command ID 0x01 with IO ID 653, Command ID 0x44 with IO ID 652, Command ID 0x44 with IO ID 653 | |
| image.status | boolean | Indicates if there is a snapshot in camera memory | Command ID 0x01 with IO ID 654, Command ID 0x01 with IO ID 655, Command ID 0x44 with IO ID 654, Command ID 0x44 with IO ID 655 | |
| iqfreeze.ain | number | volts | iQFreeze voltage on the analog input | Command ID 0x01 with IO ID 698, Command ID 0x01 with IO ID 699, Command ID 0x01 with IO ID 700, Command ID 0x44 with IO ID 698, Command ID 0x44 with IO ID 699, Command ID 0x44 with IO ID 700 |
| iqfreeze.ain.error | number | iQFreeze analog input error | Command ID 0x01 with IO ID 705, Command ID 0x01 with IO ID 706, Command ID 0x01 with IO ID 707, Command ID 0x44 with IO ID 705, Command ID 0x44 with IO ID 706, Command ID 0x44 with IO ID 707 | |
| iqfreeze.ambient.air.temperature | number | celsius | Ambient air temperature reported by iQFreeze | Command ID 0x01 with IO ID 664, Command ID 0x44 with IO ID 664 |
| iqfreeze.battery.voltage | number | volts | Battery volrage reported by iQFreeze | Command ID 0x01 with IO ID 676, Command ID 0x44 with IO ID 676 |
| iqfreeze.cycle.mode | number | Compressor's engine operational mode of corresponding compartment reported by iQFreeze | Command ID 0x01 with IO ID 667, Command ID 0x44 with IO ID 667 | |
| iqfreeze.din | number | iQFreeze digital inputs | Command ID 0x01 with IO ID 695, Command ID 0x44 with IO ID 695 | |
| iqfreeze.door.status | boolean | Status of the main door of corresponding compartment reported by iQFreeze; false - closed, true - open | Command ID 0x01 with IO ID 673, Command ID 0x44 with IO ID 673 | |
| iqfreeze.electric.hours | number | hours | Total electric hours reported by iQFreeze | Command ID 0x01 with IO ID 678, Command ID 0x44 with IO ID 678 |
| iqfreeze.engine.coolant.temperature | number | celsius | Engine coolant temperature reported by iQFreeze | Command ID 0x01 with IO ID 665, Command ID 0x44 with IO ID 665 |
| iqfreeze.engine.hours | number | hours | Total diesel hours reported by iQFreeze | Command ID 0x01 with IO ID 679, Command ID 0x44 with IO ID 679 |
| iqfreeze.engine.rpm | number | rpm | RPM of the compressor's engine reported by iQFreeze | Command ID 0x01 with IO ID 666, Command ID 0x44 with IO ID 666 |
| iqfreeze.error | number | iQFreeze error number | Command ID 0x01 with IO ID 684, Command ID 0x01 with IO ID 685, Command ID 0x44 with IO ID 684, Command ID 0x44 with IO ID 685 | |
| iqfreeze.errors.number | number | Number of active alarms at the present moment reported by iQFreeze | Command ID 0x01 with IO ID 683, Command ID 0x44 with IO ID 683 | |
| iqfreeze.operating.mode | number | System operating mode (heating, cooling, defrosting, etc) of corresponding compartment reported by iQFreeze | Command ID 0x01 with IO ID 670, Command ID 0x44 with IO ID 670 | |
| iqfreeze.refrigerator.enum | number | iQFreeze refrigerator type 1 - Thermoking, 2 - Carier Supra\Maxima, 3 - Zanotti, 4 - Thermal Master, 5 - Carrier Vector (except 1350), 6 - Mitsubishi, 7 - Carrier Vector 1350, 8 - Thermoking TGVI, 9 - Carrier Xarios | Command ID 0x01 with IO ID 693, Command ID 0x44 with IO ID 693 | |
| iqfreeze.setpoint | number | celsius | iQFreeze cargo required temperature (setpoint) in corresponding compartment | Command ID 0x01 with IO ID 661, Command ID 0x44 with IO ID 661 |
| iqfreeze.temperature | number | celsius | iQFreeze temperature value in corresponding compartment | Command ID 0x01 with IO ID 658, Command ID 0x44 with IO ID 658 |
| iqfreeze.timestamp | number | seconds | iQFreeze last record UTC timestamp | Command ID 0x01 with IO ID 715, Command ID 0x44 with IO ID 715 |
| iqfreeze.vehicle.hours | number | hours | Total engine hours reported by iQFreeze | Command ID 0x01 with IO ID 680, Command ID 0x44 with IO ID 680 |
| magnetic.card.code | string | Magnetic Card ID code | Command ID 0x01, Command ID 0x01 with IO ID 581, Command ID 0x01 with IO ID 582, Command ID 0x01 with IO ID 617, Command ID 0x44, Command ID 0x44 with IO ID 581, Command ID 0x44 with IO ID 582, Command ID 0x44 with IO ID 617 | |
| manual.can | number | Indexed Manual CAN parameter value | Command ID 0x01 with IO ID 1201...1220, Command ID 0x44 with IO ID 1201...1220 | |
| manual.can.hex | string | Indexed manual CAN parameter value in HEX representation | Command ID 0x01 with IO ID 1201...1220, Command ID 0x44 with IO ID 1201...1220 | |
| max.x.acceleration | number | g | Harsh acceleration event max accelerometer value on X-axis | Command ID 0x01 with IO ID 584, Command ID 0x44 with IO ID 584 |
| max.y.acceleration | number | g | Harsh acceleration event max accelerometer value on Y-axis | Command ID 0x01 with IO ID 585, Command ID 0x44 with IO ID 585 |
| max.z.acceleration | number | g | Harsh acceleration event max accelerometer value on Z-axis | Command ID 0x01 with IO ID 586, Command ID 0x44 with IO ID 586 |
| media | boolean | Message contain media file | ||
| media.image | object | Image file in media storage | ||
| media.video | object | Video file in media storage | ||
| mobileye.brake.signal.status | boolean | Mobileye brake signal status, true - brake signal is on, false - brake signal is off | Command ID 0x01 with IO ID 450, Command ID 0x44 with IO ID 450 | |
| mobileye.dusk.status | boolean | Mobileye dusk time indicator | Command ID 0x01 with IO ID 421, Command ID 0x44 with IO ID 421 | |
| mobileye.error.code | number | Mobileye error code | Command ID 0x01 with IO ID 427, Command ID 0x44 with IO ID 427 | |
| mobileye.error.valid.status | boolean | Mobileye error is valid status | Command ID 0x01 with IO ID 426, Command ID 0x44 with IO ID 426 | |
| mobileye.failsafe.mode.status | boolean | Mobileye indocator of failsafe mode activation | Command ID 0x01 with IO ID 433, Command ID 0x44 with IO ID 433 | |
| mobileye.forward.collision.warning.status | boolean | Mobileye indicator of forward collision warning event status | Command ID 0x01 with IO ID 431, Command ID 0x44 with IO ID 431 | |
| mobileye.headway.measurement | number | seconds | Mobileye headway measurement, 0 means no closest in-path vehicle on the range | Command ID 0x01 with IO ID 425, Command ID 0x44 with IO ID 425 |
| mobileye.headway.valid.status | boolean | Mobileye headway valid status | Command ID 0x01 with IO ID 424, Command ID 0x44 with IO ID 424 | |
| mobileye.headway.warning.level | number | Mobileye headway warning level | Command ID 0x01 with IO ID 439, Command ID 0x44 with IO ID 439 | |
| mobileye.headway.warning.repeat.enabled.status | boolean | Mobileye headway warning repeat enabled status | Command ID 0x01 with IO ID 440, Command ID 0x44 with IO ID 440 | |
| mobileye.high.beam.available.status | boolean | Mobileye high beam available status, true - high beam available, false - high beam not available | Command ID 0x01 with IO ID 458, Command ID 0x44 with IO ID 458 | |
| mobileye.high.beam.status | boolean | Mobileye high beam status, true - high beam on, false - high beam off | Command ID 0x01 with IO ID 455, Command ID 0x44 with IO ID 455 | |
| mobileye.internal.error.status | boolean | Mobileye indicator of internal error. See user manual for details | Command ID 0x01 with IO ID 432, Command ID 0x44 with IO ID 432 | |
| mobileye.lane.departure.left.warning.status | boolean | Mobileye indicator of left lane departure warning event status | Command ID 0x01 with IO ID 429, Command ID 0x44 with IO ID 429 | |
| mobileye.lane.departure.right.warning.status | boolean | Mobileye indicator of right lane departure warning event status | Command ID 0x01 with IO ID 430, Command ID 0x44 with IO ID 430 | |
| mobileye.lane.departure.warnings.status | boolean | Mobileye lane departure warnings status, true - wanrings enabled, false - warnings disabled due to low speed or configuration | Command ID 0x01 with IO ID 428, Command ID 0x44 with IO ID 428 | |
| mobileye.left.blink.available.status | boolean | Mobileye left blink available status, true - left blink available, false - left blink not available | Command ID 0x01 with IO ID 451, Command ID 0x44 with IO ID 451 | |
| mobileye.low.beam.available.status | boolean | Mobileye low beam available status, true - low beam available, false - low beam not available | Command ID 0x01 with IO ID 457, Command ID 0x44 with IO ID 457 | |
| mobileye.low.beam.status | boolean | Mobileye low beam status, true - low beam on, false - low beam off | Command ID 0x01 with IO ID 454, Command ID 0x44 with IO ID 454 | |
| mobileye.movement.status | boolean | Mobileye host vehicle is moving status | Command ID 0x01 with IO ID 423, Command ID 0x44 with IO ID 423 | |
| mobileye.night.status | boolean | Mobileye night time indicator | Command ID 0x01 with IO ID 422, Command ID 0x44 with IO ID 422 | |
| mobileye.pedestrian.collision.warning.status | boolean | Mobileye indicator of pedestrians collision warning | Command ID 0x01 with IO ID 434, Command ID 0x44 with IO ID 434 | |
| mobileye.pedestrian.danger.zone.status | boolean | Mobileye indicator of pedestrians in danger zone | Command ID 0x01 with IO ID 435, Command ID 0x44 with IO ID 435 | |
| mobileye.right.blink.available.status | boolean | Mobileye right blink available status, true - right blink available, false - right blink not available | Command ID 0x01 with IO ID 452, Command ID 0x44 with IO ID 452 | |
| mobileye.sound.type | number | Mobileye sound type | Command ID 0x01 with IO ID 420, Command ID 0x44 with IO ID 420 | |
| mobileye.speed | number | km/h | Mobileye speed | Command ID 0x01 with IO ID 460, Command ID 0x44 with IO ID 460 |
| mobileye.speed.available.status | boolean | Mobileye speed available status, true - speed available, false - speed not available | Command ID 0x01 with IO ID 459, Command ID 0x44 with IO ID 459 | |
| mobileye.tamper.status | boolean | Mobileye indicator of tamper alert (tamper alert is activated if there is no vehicle or lane detection for duration of 10 minutes; tamper alert is active above 15 km/h | Command ID 0x01 with IO ID 436, Command ID 0x44 with IO ID 436 | |
| mobileye.traffic.signs.recognition.message | string | Mobileye traffic signs recognition system message, 8-byte hex string | Command ID 0x01 with IO ID 470, Command ID 0x44 with IO ID 470 | |
| mobileye.traffic.signs.recognition.sign.type | string | Mobileye traffic signs recognition sign type, 8-byte hex string | Command ID 0x01 with IO ID 480, Command ID 0x44 with IO ID 480 | |
| mobileye.traffic.signs.recognition.status | boolean | Mobileye traffic signs recognition enabled status | Command ID 0x01 with IO ID 437, Command ID 0x44 with IO ID 437 | |
| mobileye.traffic.signs.speed.warning.level | number | Mobileye traffic signs recongition system's warning level | Command ID 0x01 with IO ID 438, Command ID 0x44 with IO ID 438 | |
| mobileye.wipers.available.status | boolean | Mobileye wipers available status, true - wipers available, false - wipers not available | Command ID 0x01 with IO ID 456, Command ID 0x44 with IO ID 456 | |
| mobileye.wipers.status | boolean | Mobileye wipers status, true - wiper passes the windshield, false - wiper is static | Command ID 0x01 with IO ID 453, Command ID 0x44 with IO ID 453 | |
| movement.status | boolean | Current movement state | Command ID 0x01 with IO ID 173, Command ID 0x44 with IO ID 173 | |
| obd.connected.status | boolean | OBDII device is connected to vehicle | Command ID 0x01 with IO ID 985, Command ID 0x44 with IO ID 985 | |
| ot.din | number | OT digital input value | Command ID 0x01 with IO ID 193...196, Command ID 0x44 with IO ID 193...196 | |
| ot.sensor.temperature | number | celsius | OT Temperature sensor value | Command ID 0x01 with IO ID 144...149, Command ID 0x44 with IO ID 144...149 |
| passenger.ibutton.code | string | iButton code of passenger | Command ID 0x01 with IO ID 536, Command ID 0x44 with IO ID 536 | |
| payload.hex | string | HEX Payload received from device | Command ID 0x0E | |
| pcb.temperature | number | celsius | PCB temperature | Command ID 0x01 with IO ID 32, Command ID 0x44 with IO ID 32 |
| peer | string | IP:port from which device connecting to the channel | ||
| phone.call.state.enum | number | Phone call status | Command ID 0x01 with IO ID 596, Command ID 0x44 with IO ID 596 | |
| port.id | number | Port ID 0 - port A, 1 - port B, 2 - port C | Command ID 0x0E | |
| position.altitude | number | meters | Altitude value for position | Command ID 0x01, Command ID 0x07, Command ID 0x44 |
| position.direction | number | degrees | Heading angle at position detection moment | Command ID 0x01, Command ID 0x07, Command ID 0x44 |
| position.hdop | number | Horizontal dilution of precision | Command ID 0x01, Command ID 0x07, Command ID 0x44 | |
| position.latitude | number | degrees | Latitude coordinate value | Command ID 0x01, Command ID 0x07, Command ID 0x26, Command ID 0x44 |
| position.longitude | number | degrees | Longitude coordinate value | Command ID 0x01, Command ID 0x07, Command ID 0x26, Command ID 0x44 |
| position.satellites | number | Quantity of satellites used to calculate coordinates for given position information | Command ID 0x01, Command ID 0x07, Command ID 0x44 | |
| position.speed | number | km/h | Instant speed at position detection moment | Command ID 0x01, Command ID 0x01 with IO ID 176, Command ID 0x44, Command ID 0x44 with IO ID 176 |
| position.timestamp | number | seconds | Timestamp when coordinates where calculated | Command ID 0x07 |
| private.status | boolean | Device is in private mode | Command ID 0x01 with IO ID 417, Command ID 0x01 with IO ID 806, Command ID 0x44 with IO ID 417, Command ID 0x44 with IO ID 806 | |
| protocol.id | number | ID of protocol | ||
| refrigerator.door.open.status | boolean | Refrigerator door open status | Command ID 0x01 with IO ID 191, Command ID 0x44 with IO ID 191 | |
| refrigerator.engine.mode | string | Refrigerator engine mode - diesel, electric | Command ID 0x01 with IO ID 192, Command ID 0x44 with IO ID 192 | |
| refrigerator.engine.mode.enum | number | Refrigerator engine mode | Command ID 0x01 with IO ID 192, Command ID 0x44 with IO ID 192 | |
| refrigerator.high.speed.status | boolean | Fridge high speed status | Command ID 0x01 with IO ID 190, Command ID 0x44 with IO ID 190 | |
| refrigerator.operate.mode | string | Refrigerator operating mode - cycle sentry, continuous | Command ID 0x01 with IO ID 189, Command ID 0x44 with IO ID 189 | |
| refrigerator.operate.mode.enum | number | Refrigerator operating mode | Command ID 0x01 with IO ID 189, Command ID 0x44 with IO ID 189 | |
| rfid.code | string | Hexadecimal code of connected RFID | Command ID 0x01 with IO ID 171, Command ID 0x01 with IO ID 172, Command ID 0x44 with IO ID 171, Command ID 0x44 with IO ID 172 | |
| rollover.alarm.status | boolean | Roll over alarm state | Command ID 0x01 with IO ID 411, Command ID 0x44 with IO ID 411 | |
| sdcard.log.enum | number | SD card log id | Command ID 0x01 with IO ID 113, Command ID 0x44 with IO ID 113 | |
| sdcard.log.marker.value | number | SD Log record Marker | Command ID 0x01 with IO ID 252, Command ID 0x44 with IO ID 252 | |
| security.event.enum | number | Security information ID | Command ID 0x01 with IO ID 25, Command ID 0x44 with IO ID 25 | |
| segment.acceleration.events | number | The number of harsh acceleration events during the last segment | Command ID 0x01 with IO ID 136, Command ID 0x44 with IO ID 136 | |
| segment.ain.voltage | number | volts | Voltage difference between current and earlier obtained voltage reference | Command ID 0x01 with IO ID 26, Command ID 0x01 with IO ID 33, Command ID 0x44 with IO ID 26, Command ID 0x44 with IO ID 33 |
| segment.braking.distance | number | km | Distance, travelled while brake pedal was pressed since last record | Command ID 0x01 with IO ID 527, Command ID 0x01 with IO ID 878, Command ID 0x44 with IO ID 527, Command ID 0x44 with IO ID 878 |
| segment.braking.duration | number | seconds | Time period when brake pedal was pressed and vehicle speed was not 0 since last record | Command ID 0x01 with IO ID 528, Command ID 0x44 with IO ID 528 |
| segment.braking.events | number | The number of braking events during the last segment | Command ID 0x01 with IO ID 134, Command ID 0x44 with IO ID 134 | |
| segment.can.fuel.consumed | number | liters | Fuel volume consumed by vehicle on the last segment using CAN data | Command ID 0x01 with IO ID 122, Command ID 0x44 with IO ID 122 |
| segment.cornering.events | number | The number of cornering events during the last segment | Command ID 0x01 with IO ID 143, Command ID 0x44 with IO ID 143 | |
| segment.cruise.control.distance | number | km | Distance travelled under cruise control during the last segment | Command ID 0x01 with IO ID 142, Command ID 0x01 with IO ID 546, Command ID 0x01 with IO ID 881, Command ID 0x44 with IO ID 142, Command ID 0x44 with IO ID 546, Command ID 0x44 with IO ID 881 |
| segment.cruise.control.duration | number | seconds | Time period between two consecutive records when Cruise control was on | Command ID 0x01 with IO ID 885, Command ID 0x01 with IO ID 897, Command ID 0x44 with IO ID 885, Command ID 0x44 with IO ID 897 |
| segment.cruise.control.free.rolling.distance | number | km | Distance driven between two consecutive records when CC and Engine are ON, TPS = 0 and RPM is in Free-rolling range | Command ID 0x01 with IO ID 881, Command ID 0x01 with IO ID 891, Command ID 0x44 with IO ID 881, Command ID 0x44 with IO ID 891 |
| segment.cruise.control.free.rolling.fuel.used | number | liters | Fuel used between two consecutive records when CC and Engine are ON, TPS = 0 and RPM is in Free-rolling range | Command ID 0x01 with IO ID 882, Command ID 0x01 with IO ID 892, Command ID 0x44 with IO ID 882, Command ID 0x44 with IO ID 892 |
| segment.cruise.control.fuel.used | number | liters | Fuel used under cruise control during the last segment | Command ID 0x01 with IO ID 547, Command ID 0x01 with IO ID 882, Command ID 0x44 with IO ID 547, Command ID 0x44 with IO ID 882 |
| segment.cruise.control.off.free.rolling.distance | number | km | Distance driven between two consecutive records when CC is OFF, Engine is ON, TPS = 0 and RPM is in Free-rolling range | Command ID 0x01 with IO ID 881, Command ID 0x01 with IO ID 893, Command ID 0x44 with IO ID 881, Command ID 0x44 with IO ID 893 |
| segment.cruise.control.off.free.rolling.fuel.used | number | liters | Fuel used between two consecutive records when CC is OFF, Engine is ON, TPS = 0 and RPM is in Free-rolling range | Command ID 0x01 with IO ID 882, Command ID 0x01 with IO ID 894, Command ID 0x44 with IO ID 882, Command ID 0x44 with IO ID 894 |
| segment.cruise.control.off.retarder.torque.distance | number | km | Distance driven between two consecutive records when retarder torque was above zero and CC was OFF. | Command ID 0x01 with IO ID 885, Command ID 0x01 with IO ID 896, Command ID 0x44 with IO ID 885, Command ID 0x44 with IO ID 896 |
| segment.cruise.control.tps.distance | number | km | Distance driven between two consecutive records when Engine & CC states are ON and TPS is above the configured limit | Command ID 0x01 with IO ID 881, Command ID 0x01 with IO ID 899, Command ID 0x44 with IO ID 881, Command ID 0x44 with IO ID 899 |
| segment.cruise.control.tps.duration | number | seconds | Time period between two consecutive records when Engine & CC states are ON and TPS is above the configured limit | Command ID 0x01 with IO ID 885, Command ID 0x01 with IO ID 900, Command ID 0x44 with IO ID 885, Command ID 0x44 with IO ID 900 |
| segment.cruise.control.tps.fuel.used | number | liters | Fuel used between two consecutive records when Engine & CC states are ON and TPS is above the configured limit | Command ID 0x01 with IO ID 882, Command ID 0x01 with IO ID 898, Command ID 0x44 with IO ID 882, Command ID 0x44 with IO ID 898 |
| segment.engine.on.time | number | seconds | Time when engine was on during the last segment | Command ID 0x01 with IO ID 139, Command ID 0x01 with IO ID 876, Command ID 0x44 with IO ID 139, Command ID 0x44 with IO ID 876 |
| segment.engine.overload.distance | number | km | Distance travelled with overloaded engine during the last segment | Command ID 0x01 with IO ID 542, Command ID 0x01 with IO ID 880, Command ID 0x44 with IO ID 542, Command ID 0x44 with IO ID 880 |
| segment.engine.overload.fuel.used | number | liters | Fuel used while engine was overloaded during the last segment | Command ID 0x01 with IO ID 543, Command ID 0x01 with IO ID 879, Command ID 0x44 with IO ID 543, Command ID 0x44 with IO ID 879 |
| segment.extreme.braking.events | number | The number of extreme braking events during the last segment | ||
| segment.free.rolling.distance | number | km | Free rolling distance during the last segment | Command ID 0x01 with IO ID 541, Command ID 0x01 with IO ID 880, Command ID 0x44 with IO ID 541, Command ID 0x44 with IO ID 880 |
| segment.fuel.idle.used | number | liters | Fuel used while idling during the last segment | Command ID 0x01 with IO ID 540, Command ID 0x01 with IO ID 879, Command ID 0x44 with IO ID 540, Command ID 0x44 with IO ID 879 |
| segment.harsh.braking.events | number | The number of harsh braking events during the last segment | ||
| segment.highest.gear.distance | number | km | Distance travelled on highest gear during the last segment | Command ID 0x01 with IO ID 548, Command ID 0x01 with IO ID 880, Command ID 0x44 with IO ID 548, Command ID 0x44 with IO ID 880 |
| segment.highest.gear.fuel.used | number | liters | Fuel used when travelling on highest gear during the last segment | Command ID 0x01 with IO ID 549, Command ID 0x01 with IO ID 879, Command ID 0x44 with IO ID 549, Command ID 0x44 with IO ID 879 |
| segment.max.acceleration | number | g | Maximum acceleration value that occurred on the segment | Command ID 0x01 with IO ID 403, Command ID 0x44 with IO ID 403 |
| segment.max.braking.acceleration | number | g | Maximum braking acceleration value that occurred on the segment | Command ID 0x01 with IO ID 402, Command ID 0x44 with IO ID 402 |
| segment.max.cornering.acceleration | number | g | Maximum cornering acceleration value that occurred on the segment | Command ID 0x01 with IO ID 404, Command ID 0x44 with IO ID 404 |
| segment.max.engine.rpm | number | rpm | Maximum engine RPM on segment | Command ID 0x01 with IO ID 133, Command ID 0x44 with IO ID 133 |
| segment.max.speed | number | km/h | Maximum speed on the segment | Command ID 0x01 with IO ID 130, Command ID 0x44 with IO ID 130 |
| segment.normal.speed.distance | number | km | Mileage of the segment when vehicle had normal speed | Command ID 0x01 with IO ID 141, Command ID 0x01 with IO ID 878, Command ID 0x44 with IO ID 141, Command ID 0x44 with IO ID 878 |
| segment.overspeeding.distance | number | km | Distance travelled with overspeeding during the last segment | Command ID 0x01 with IO ID 544, Command ID 0x01 with IO ID 880, Command ID 0x44 with IO ID 544, Command ID 0x44 with IO ID 880 |
| segment.overspeeding.fuel.used | number | liters | Fuel used with overspeeding during the last segment | Command ID 0x01 with IO ID 545, Command ID 0x01 with IO ID 879, Command ID 0x44 with IO ID 545, Command ID 0x44 with IO ID 879 |
| segment.overspeeding.time | number | seconds | Time when speed was above limit during the last segment | Command ID 0x01 with IO ID 131, Command ID 0x44 with IO ID 131 |
| segment.retarder.torque.distance | number | km | Distance driven between two consecutive records when retarder torque was above zero. | Command ID 0x01 with IO ID 885, Command ID 0x01 with IO ID 895, Command ID 0x44 with IO ID 885, Command ID 0x44 with IO ID 895 |
| segment.rpm.green | number | seconds | Time when RPM was optimal during the last segment | Command ID 0x01 with IO ID 140, Command ID 0x01 with IO ID 877, Command ID 0x44 with IO ID 140, Command ID 0x44 with IO ID 877 |
| segment.rpm.range.distance | number | km | Distance travelled with RPM within the specified range during the last segment | Command ID 0x01 with IO ID 550, Command ID 0x01 with IO ID 552, Command ID 0x01 with IO ID 554, Command ID 0x01 with IO ID 556, Command ID 0x01 with IO ID 883, Command ID 0x44 with IO ID 550, Command ID 0x44 with IO ID 552, Command ID 0x44 with IO ID 554, Command ID 0x44 with IO ID 556, Command ID 0x44 with IO ID 883 |
| segment.rpm.range.fuel.used | number | liters | Fuel used when RPM was within the specified range during the last segment during the last segment | Command ID 0x01 with IO ID 551, Command ID 0x01 with IO ID 553, Command ID 0x01 with IO ID 555, Command ID 0x01 with IO ID 557, Command ID 0x01 with IO ID 884, Command ID 0x44 with IO ID 551, Command ID 0x44 with IO ID 553, Command ID 0x44 with IO ID 555, Command ID 0x44 with IO ID 557, Command ID 0x44 with IO ID 884 |
| segment.rpm.red | number | seconds | Time when RPM was not optimal during the last segment | Command ID 0x01 with IO ID 132, Command ID 0x44 with IO ID 132 |
| segment.rpm.red.distance | number | km | Distance travelled when RPM was not optimal during the last segment | Command ID 0x01 with IO ID 539, Command ID 0x01 with IO ID 877, Command ID 0x44 with IO ID 539, Command ID 0x44 with IO ID 877 |
| segment.vehicle.mileage | number | km | Segment mileage | Command ID 0x01 with IO ID 77, Command ID 0x44 with IO ID 77 |
| self.calibration.state | number | State of self calibration of accelerometer | Command ID 0x01 with IO ID 905, Command ID 0x44 with IO ID 905 | |
| sensor.frequency | number | hz | Frequency sensor value | Command ID 0x01 with IO ID 507, Command ID 0x01 with IO ID 508, Command ID 0x44 with IO ID 507, Command ID 0x44 with IO ID 508 |
| sensor.humidity | number | percentage | Humidity sensor value, i.e. relative air humidity level | Command ID 0x01 with IO ID 817...820, Command ID 0x44 with IO ID 817...820 |
| sensor.id | string | Sensor ID | Command ID 0x01 with IO ID 70, Command ID 0x01 with IO ID 71, Command ID 0x01 with IO ID 72, Command ID 0x01 with IO ID 73, Command ID 0x44 with IO ID 70, Command ID 0x44 with IO ID 71, Command ID 0x44 with IO ID 72, Command ID 0x44 with IO ID 73 | |
| sensor.state.bitmask | string | Technoton sensors configuration bitmask, represented as HEX | Command ID 0x01 with IO ID 794...798, Command ID 0x44 with IO ID 794...798 | |
| sensor.temperature | number | celsius | Temperature sensor value | Command ID 0x01 with IO ID 74, Command ID 0x01 with IO ID 78, Command ID 0x01 with IO ID 79, Command ID 0x01 with IO ID 80, Command ID 0x44 with IO ID 74, Command ID 0x44 with IO ID 78, Command ID 0x44 with IO ID 79, Command ID 0x44 with IO ID 80 |
| sensor.temperature.error | number | Temperature sensor error code | Command ID 0x01 with IO ID 74, Command ID 0x01 with IO ID 78, Command ID 0x01 with IO ID 79, Command ID 0x01 with IO ID 80, Command ID 0x44 with IO ID 74, Command ID 0x44 with IO ID 78, Command ID 0x44 with IO ID 79, Command ID 0x44 with IO ID 80 | |
| server.timestamp | number | seconds | Timestamp when server received a message | |
| shock.duration | number | milliseconds | Duration of shock | Command ID 0x01 with IO ID 576, Command ID 0x44 with IO ID 576 |
| sleep.timer.wakeup.status | boolean | Device wake-up by timer event | Command ID 0x01 with IO ID 174, Command ID 0x44 with IO ID 174 | |
| spreader.mode | number | Spreader mode | Command ID 0x01 with IO ID 490, Command ID 0x44 with IO ID 490 | |
| tacho.card.reader.status | boolean | Tacho card reader state | Command ID 0x01 with IO ID 24, Command ID 0x44 with IO ID 24 | |
| tacho.driver.card.data.available.status | boolean | Tacho Driver card data availability | Command ID 0x01 with IO ID 870, Command ID 0x44 with IO ID 870 | |
| tacho.driver.compensation.before.last.week.duration | number | seconds | Tacho Driver open compensation in week before last | Command ID 0x01 with IO ID 868, Command ID 0x44 with IO ID 868 |
| tacho.driver.compensation.last.week.duration | number | seconds | Tacho Driver open compensation in the last week | Command ID 0x01 with IO ID 867, Command ID 0x44 with IO ID 867 |
| tacho.driver.compensation.second.before.last.week.duration | number | seconds | Tacho Driver open compensation in 2nd week before last | Command ID 0x01 with IO ID 869, Command ID 0x44 with IO ID 869 |
| tacho.driver.continuous_driving.duration | number | seconds | Driver continuous driving time | Command ID 0x01 with IO ID 119, Command ID 0x44 with IO ID 119 |
| tacho.driver.cumulative_break.duration | number | seconds | Driver cumulative break time | Command ID 0x01 with IO ID 120, Command ID 0x44 with IO ID 120 |
| tacho.driver.cumulative_driving.duration | number | seconds | Driver cumulative driving time | Command ID 0x01 with IO ID 117, Command ID 0x44 with IO ID 117 |
| tacho.driver.current.activity.duration | number | seconds | Current driver activity duration | Command ID 0x01 with IO ID 118, Command ID 0x44 with IO ID 118 |
| tacho.driver.daily.before.rest.duration | number | seconds | Time left until new daily rest period read from Tacho, indexed for driver number | Command ID 0x01 with IO ID 853, Command ID 0x44 with IO ID 853 |
| tacho.driver.daily.limit.exceed.number | number | Tacho Driver number of times 9h daily driving time exceeds | Command ID 0x01 with IO ID 1147, Command ID 0x44 with IO ID 1147 | |
| tacho.driver.multi.manning.status | boolean | Tacho Driver multi-manning detection status | Command ID 0x01 with IO ID 870, Command ID 0x44 with IO ID 870 | |
| tacho.driver.next.daily.rest.duration | number | seconds | Tacho duration of next daily rest period for the driver | Command ID 0x01 with IO ID 874, Command ID 0x44 with IO ID 874 |
| tacho.driver.next.driving.duration | number | seconds | Tacho Driver duration of next driving period | Command ID 0x01 with IO ID 863, Command ID 0x44 with IO ID 863 |
| tacho.driver.next.rest.duration | number | seconds | Duration of next rest period read from Tacho, indexed for driver number | Command ID 0x01 with IO ID 864, Command ID 0x44 with IO ID 864 |
| tacho.driver.next.weekly.rest.duration | number | seconds | Tacho duration of next weekly rest period for the driver | Command ID 0x01 with IO ID 875, Command ID 0x44 with IO ID 875 |
| tacho.driver.remaining.before.rest.duration | number | seconds | Duration remaining before next rest period read from Tacho, indexed for driver number | Command ID 0x01 with IO ID 866, Command ID 0x44 with IO ID 866 |
| tacho.driver.remaining.current.rest.duration | number | seconds | Tacho Driver remaining time of current break/rest | Command ID 0x01 with IO ID 865, Command ID 0x44 with IO ID 865 |
| tacho.driver.remaining.driving.time | number | seconds | Maximum remaining driving time left to next rest period, indexed for driver number | Command ID 0x01 with IO ID 859, Command ID 0x44 with IO ID 859 |
| tacho.driver.remaining.reduced.daily.rest.periods | number | Tacho Driver remaining reduced daily rest periods. Range 0 to 3 | Command ID 0x01 with IO ID 870, Command ID 0x44 with IO ID 870 | |
| tacho.driver.remaining.shift.driving.duration | number | seconds | Tacho Driver remaining driving time on current shift | Command ID 0x01 with IO ID 860, Command ID 0x44 with IO ID 860 |
| tacho.driver.remaining.ten.hour.driving.times | number | Tacho Driver remaining 10h driving times. Range 0 to 2 | Command ID 0x01 with IO ID 870, Command ID 0x44 with IO ID 870 | |
| tacho.driver.remaining.weekly.driving.duration | number | seconds | Tacho Driver remaining driving time of current week | Command ID 0x01 with IO ID 861, Command ID 0x44 with IO ID 861 |
| tacho.driver.time.enum | number | Driver time states | Command ID 0x01 with IO ID 121, Command ID 0x44 with IO ID 121 | |
| tacho.driver.time.overlap.status | boolean | Tacho Driver time overlap detection status | Command ID 0x01 with IO ID 870, Command ID 0x44 with IO ID 870 | |
| tacho.driver.time.until.next.driving | number | seconds | Tacho Driver time left until next driving period | Command ID 0x01 with IO ID 862, Command ID 0x44 with IO ID 862 |
| tacho.driver.unknown.periods.present.status | boolean | Tacho Driver unknown periods presence | Command ID 0x01 with IO ID 870, Command ID 0x44 with IO ID 870 | |
| tacho.driver.weekly.before.rest.duration | number | seconds | Time left until new weekly rest period read from Tacho, indexed for driver number | Command ID 0x01 with IO ID 854, Command ID 0x44 with IO ID 854 |
| tacho.driver.weekly.driving.duration | number | seconds | Current weekly driving time read from Tacho, indexed for driver number | Command ID 0x01 with IO ID 1146, Command ID 0x44 with IO ID 1146 |
| tacho.driver.weekly.rest.calculation.status | boolean | Tacho Driver weekly rest period calculation status | Command ID 0x01 with IO ID 870, Command ID 0x44 with IO ID 870 | |
| tacho.engine.rpm | number | rpm | Engine RPM reported by tacho | Command ID 0x01 with IO ID 166, Command ID 0x44 with IO ID 166 |
| tacho.first.driver.card.status | boolean | Tacho card of first driver presence | Command ID 0x01 with IO ID 161, Command ID 0x44 with IO ID 161 | |
| tacho.fms.driver.id | string | Indexed Driver ID read from Tacho FMS | Command ID 0x01 with IO ID 155, Command ID 0x01 with IO ID 156, Command ID 0x01 with IO ID 157, Command ID 0x01 with IO ID 158, Command ID 0x44 with IO ID 155, Command ID 0x44 with IO ID 156, Command ID 0x44 with IO ID 157, Command ID 0x44 with IO ID 158 | |
| tacho.fms.driver.status.enum | number | Indexed driver state from Tacho FMS | Command ID 0x01 with IO ID 159, Command ID 0x01 with IO ID 160, Command ID 0x44 with IO ID 159, Command ID 0x44 with IO ID 160 | |
| tacho.position.speed | number | km/h | Instant speed reported by tacho | Command ID 0x01 with IO ID 165, Command ID 0x44 with IO ID 165 |
| tacho.registration.code | string | Tacho registration number | Command ID 0x01 with IO ID 167, Command ID 0x01 with IO ID 168, Command ID 0x44 with IO ID 167, Command ID 0x44 with IO ID 168 | |
| tacho.second.driver.card.status | boolean | Tacho card of second driver presence | Command ID 0x01 with IO ID 162, Command ID 0x44 with IO ID 162 | |
| tacho.trip.mileage | number | km | Trip mileage reported by tacho | Command ID 0x01 with IO ID 164, Command ID 0x44 with IO ID 164 |
| tacho.vehicle.id | string | CAN tachograph vehicle ID | Command ID 0x01 with IO ID 152, Command ID 0x01 with IO ID 153, Command ID 0x01 with IO ID 154, Command ID 0x44 with IO ID 152, Command ID 0x44 with IO ID 153, Command ID 0x44 with IO ID 154 | |
| tacho.vehicle.mileage | number | km | Total mileage calculated by tacho | Command ID 0x01 with IO ID 163, Command ID 0x44 with IO ID 163 |
| tamper.alarm | boolean | Tamper alarm event | Command ID 0x01 with IO ID 758, Command ID 0x44 with IO ID 758 | |
| timestamp | number | seconds | Message timestamp | Command ID 0x01, Command ID 0x05, Command ID 0x0B, Command ID 0x0E, Command ID 0x26, Command ID 0x44 |
| timestamp.key | number | Message timestamp in seconds with message sequence number appended as the value fractional part. Used to distinguish between several messages that have the same timestamp. | Command ID 0x01, Command ID 0x44 | |
| tire.pressure.bitmask | number | Tire pressure measurement system message | Command ID 0x01 with IO ID 256...291, Command ID 0x44 with IO ID 256...291 | |
| total.idle.time | number | seconds | Total time that vehicle was in idling state | Command ID 0x01 with IO ID 175, Command ID 0x01 with IO ID 876, Command ID 0x44 with IO ID 175, Command ID 0x44 with IO ID 876 |
| towing.alarm.status | boolean | Towing alarm state | Command ID 0x01 with IO ID 410, Command ID 0x44 with IO ID 410 | |
| trailer.braking.wheel.speed | number | km/h | Trailers Braking system wheel-based vehicle speed | Command ID 0x01 with IO ID 563, Command ID 0x44 with IO ID 563 |
| trailer.lateral.acceleration | number | m/s^2 | Trailers Lateral acceleration | Command ID 0x01 with IO ID 565, Command ID 0x44 with IO ID 565 |
| trailer.main.axle.wheel.diff.speed | number | km/h | Trailers Wheel speed difference main axle | Command ID 0x01 with IO ID 564, Command ID 0x44 with IO ID 564 |
| trailer.pneumatic.supply.pressure | number | kPa | Trailer pneumatic supply pressure | Command ID 0x01 with IO ID 567, Command ID 0x44 with IO ID 567 |
| trailer.state.bitmask | number | Trailer status | Command ID 0x01 with IO ID 561, Command ID 0x01 with IO ID 562, Command ID 0x44 with IO ID 561, Command ID 0x44 with IO ID 562 | |
| trailer.tire.pressure | number | kPa | Trailer tires pressure | Command ID 0x01 with IO ID 740, Command ID 0x44 with IO ID 740 |
| trailer.vin | string | Trailer VIN | Command ID 0x01 with IO ID 614...616, Command ID 0x44 with IO ID 614...616 | |
| trailer.wireless.id | string | Trailer wireless ID | Command ID 0x01 with IO ID 823, Command ID 0x01 with IO ID 824, Command ID 0x01 with IO ID 825, Command ID 0x44 with IO ID 823, Command ID 0x44 with IO ID 824, Command ID 0x44 with IO ID 825 | |
| trip.state.enum | number | Trip status | Command ID 0x01 with IO ID 583, Command ID 0x44 with IO ID 583 | |
| trip.type | string | Trip type. 0 - Private, 1 - Business, 255 - Not available | Command ID 0x01 with IO ID 806, Command ID 0x44 with IO ID 806 | |
| ubi.process.status | boolean | UBI data saving is in process | Command ID 0x01 with IO ID 559, Command ID 0x44 with IO ID 559 | |
| umts.enabled | boolean | UMTS enabled | Command ID 0x01 with IO ID 414, Command ID 0x44 with IO ID 414 | |
| vehicle.mileage | number | km | Total calculated mileage | Command ID 0x01 with IO ID 65, Command ID 0x44 with IO ID 65 |
| vehicle.vin | string | VIN of vehicle | Command ID 0x01 with IO ID 104, Command ID 0x01 with IO ID 105, Command ID 0x01 with IO ID 106, Command ID 0x01 with IO ID 939, Command ID 0x01 with IO ID 940, Command ID 0x01 with IO ID 941, Command ID 0x44 with IO ID 104, Command ID 0x44 with IO ID 105, Command ID 0x44 with IO ID 106, Command ID 0x44 with IO ID 939, Command ID 0x44 with IO ID 940, Command ID 0x44 with IO ID 941 | |
| virtual.engine.ignition.status | boolean | Virtual engine ignition status | Command ID 0x01 with IO ID 251, Command ID 0x44 with IO ID 251 | |
| wireless.enabled | boolean | Wireless enabled | Command ID 0x01 with IO ID 413, Command ID 0x44 with IO ID 413 | |
| wireless.pair.status | boolean | Wireless Pair | Command ID 0x01 with IO ID 416, Command ID 0x44 with IO ID 416 | |
| x.acceleration | number | g | Accelerometer value X | Command ID 0x01 with IO ID 49, Command ID 0x44 with IO ID 49 |
| x.axis.angle | number | degrees | X-axis angle to horizon | Command ID 0x01 with IO ID 611, Command ID 0x44 with IO ID 611 |
| y.acceleration | number | g | Accelerometer value Y | Command ID 0x01 with IO ID 50, Command ID 0x44 with IO ID 50 |
| y.axis.angle | number | degrees | Y-axis angle to horizon | Command ID 0x01 with IO ID 612, Command ID 0x44 with IO ID 612 |
| z.acceleration | number | g | Accelerometer value Z | Command ID 0x01 with IO ID 51, Command ID 0x44 with IO ID 51 |
| z.axis.angle | number | degrees | Z-axis angle to horizon | Command ID 0x01 with IO ID 613, Command ID 0x44 with IO ID 613 |