| Parameter | Type | Unit | Description | Sources |
|---|---|---|---|---|
| agps.position.valid | boolean | AGPS data valid | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| alarm.panic.start | boolean | Panic alarm event started | Command 0x01 with Key 0x02 | |
| alarm.panic.stop | boolean | Panic alarm event ended | Command 0x01 with Key 0x02 | |
| amber.alarm.start | boolean | Amber alarm event started | Command 0x01 with Key 0x02 | |
| amber.alarm.stop | boolean | Amber alarm event stopped | Command 0x01 with Key 0x02 | |
| battery.charging.status | boolean | Battery charging status | Command 0x01 with Key 0x02, Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| battery.full | boolean | Battery fully charged | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| battery.level | number | percentage | Internal battery level | Command 0x01 with Key 0x24, Command 0x02 with Key 0x14, Command 0x03 with Key 0x24 |
| battery.low.alarm | boolean | Battery low alarm event | Command 0x01 with Key 0x02 | |
| battery.voltage | number | volts | Internal battery voltage | Command 0x02 with Key 0x14 |
| beacon.absence.status | boolean | Beacon absence alarm status | Command 0x01 with Key 0x02 | |
| beacon.come.home.alarm | boolean | Beacon come home alert | Command 0x01 with Key 0x02 | |
| beacon.leave.home.alarm | boolean | Beacon leave home alert | Command 0x01 with Key 0x02 | |
| ble.beacons | array | Standard parameter names used: *id* - beacon identification string. Usually it is beacon's UUID or MAC-address *local_name* - Beacons's Local Name *rssi* - BLE signal level. Units = dBm *battery.voltage* - Beacon's battery voltage. Units = volts *battery.level* - Beacon's battery level. Units = percentage *temperature* - Beacon's temperature. Units = celsius |
Command 0x01 with Key 0x28, Command 0x01 with Key 0x2C | |
| ble.disconnected.alarm | boolean | BLE disconnected alert | Command 0x01 with Key 0x02 | |
| blood.pressure.diastolic | number | mm/Hg | Diastolic blood pressure | Command 0x01 with Key 0x64 |
| blood.pressure.systolic | number | mm/Hg | Systolic blood pressure | Command 0x01 with Key 0x64 |
| bluetooth.connected.status | boolean | Bluetooth connection status | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| bluetooth.mac.address | string | Bluetooth MAC address | Command 0x01 with Key 0x23, Command 0x01 with Key 0x26 | |
| call.duration | number | Call duration | Command 0x01 with Key 0x25 | |
| call.phone.number | string | Call phone number | Command 0x01 with Key 0x25 | |
| call.return.code | number | Call return code | Command 0x01 with Key 0x25 | |
| call.status | boolean | Call status bit | Command 0x01 with Key 0x25 | |
| call.type | string | Call type | Command 0x01 with Key 0x25 | |
| call.type.enum | number | Call type number | Command 0x01 with Key 0x25 | |
| channel.id | number | ID of channel that received a message | ||
| device.firmware.version | string | Firmware revision | Command 0x03 with Key 0x30 | |
| device.id | number | ID of device that received a message | ||
| device.name | string | Name of device that received a message | ||
| device.reboot | boolean | Device reboot status | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| device.self.name | string | Device name reported by the device | Command 0x02 with Key 0x13 | |
| device.serial.number | string | Device serial number | Command 0x01 with Key 0x03 | |
| device.type.id | number | ID of device type of device that received a message | ||
| event.enum | number | Protocol-specific event code | Command 0x01 | |
| event.seqnum | number | Unique event sequence number | ||
| fall.alarm.start | boolean | Fall alarm event started | Command 0x01 with Key 0x02 | |
| fall.alarm.status | boolean | Fall alarm status | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| fall.alarm.stop | boolean | Fall alarm event stopped | Command 0x01 with Key 0x02 | |
| geofence.alarm | boolean | Geofence alarm event | Command 0x01 with Key 0x02 | |
| geofence.status | boolean | Geofence entered status | Command 0x01 with Key 0x02 | |
| gnss.status | boolean | GNSS receiver on/off status | ||
| gnss.vehicle.mileage | number | km | Vehicle mileage calculated by global navigation system (GNSS) | Command 0x01 with Key 0x20 |
| gsm.cellid | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID | Command 0x01 with Key 0x21, Command 0x01 with Key 0x29, Command 0x01 with Key 0x2B, Command 0x03 with Key 0x21 | |
| gsm.lac | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code | Command 0x01 with Key 0x21, Command 0x01 with Key 0x29, Command 0x01 with Key 0x2B, Command 0x03 with Key 0x21 | |
| gsm.mcc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code | Command 0x01 with Key 0x21, Command 0x01 with Key 0x29, Command 0x01 with Key 0x2B, Command 0x03 with Key 0x21 | |
| gsm.mnc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code | Command 0x01 with Key 0x21, Command 0x01 with Key 0x29, Command 0x01 with Key 0x2B, Command 0x03 with Key 0x21 | |
| gsm.network.status | boolean | Registration status in the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | ||
| gsm.network.type | string | The type of the Mobile network the device is currently registered to | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| gsm.signal.dbm | number | dbm | Strength of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 |
| gsm.signal.level | number | percentage | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal strength level | |
| gsm.sim.iccid | string | Integrated Circuit Card Id of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Command 0x01 with Key 0x04 | |
| heart.rate | number | bpm | Heart rate | Command 0x01 with Key 0x40, Command 0x01 with Key 0x64 |
| heart.rate.trust.level | number | percentage | Heart rate trust level | Command 0x01 with Key 0x40 |
| ident | string | Device unique identifier like serial number, IMEI, etc | ||
| indoor.status | boolean | Indoor/outdoor status, true - indoor, false - outdoor | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| location.source.beacon | boolean | Location is obtained by Beacon | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| location.source.bluetooth | boolean | Location is obtained by Bluetooth | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| location.source.gps | boolean | Location is obtained via GPS | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| location.source.gsm | boolean | Location is obtained by Mobile network (GSM, 3G, 4G, LTE, 5G, ...) cell towers | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| location.source.smart | boolean | Smart locating flag | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| location.source.wifi | boolean | Location is obtained by Wi-Fi | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| message.buffered.status | boolean | Black box message | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| motion.alarm | boolean | Motion alarm | Command 0x01 with Key 0x02 | |
| movement.event | boolean | Movement detected | ||
| movement.status | boolean | Current movement state | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| no.motion.alarm | boolean | No motion alarm | Command 0x01 with Key 0x02 | |
| one.day.upload | boolean | One day upload alarm flag | Command 0x01 with Key 0x02 | |
| operating.mode.enum | number | Protocol-specific device operating mode | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| overspeeding.event | boolean | Overspeeding detected | Command 0x01 with Key 0x02 | |
| peer | string | IP:port from which device connecting to the channel | ||
| perfusion.index | number | SPO2 sensor Perfusion Index - strength of the blood flow at the sensor site | Command 0x01 with Key 0x64 | |
| pet.activity | number | Pet activity | Command 0x01 with Key 0x31 | |
| position.address | string | Location Address | Command 0x01 with Key 0x23, Command 0x01 with Key 0x2A | |
| position.altitude | number | meters | Altitude value for position | Command 0x01 with Key 0x20, Command 0x01 with Key 0x26, Command 0x01 with Key 0x27 |
| position.direction | number | degrees | Heading angle at position detection moment | Command 0x01 with Key 0x20 |
| position.hdop | number | Horizontal dilution of precision | Command 0x01 with Key 0x20, Command 0x01 with Key 0x26, Command 0x01 with Key 0x27 | |
| position.latitude | number | degrees | Latitude coordinate value | Command 0x01 with Key 0x20, Command 0x01 with Key 0x23, Command 0x01 with Key 0x26, Command 0x01 with Key 0x27, Command 0x01 with Key 0x2A |
| position.longitude | number | degrees | Longitude coordinate value | Command 0x01 with Key 0x20, Command 0x01 with Key 0x23, Command 0x01 with Key 0x26, Command 0x01 with Key 0x27, Command 0x01 with Key 0x2A |
| position.satellites | number | Quantity of satellites used to calculate coordinates for given position information | Command 0x01 with Key 0x20 | |
| position.speed | number | km/h | Instant speed at position detection moment | Command 0x01 with Key 0x20 |
| position.valid | boolean | Is position information accurate and valid for given timestamp | Command 0x01 with Key 0x20 | |
| power.off.alarm | boolean | Power of alarm event | Command 0x01 with Key 0x02 | |
| power.on.alarm | boolean | Power ON alert | Command 0x01 with Key 0x02 | |
| protocol.id | number | ID of protocol | ||
| reset.reason | string | Device reset reason | Command 0x01 with Key 0x66 | |
| server.timestamp | number | seconds | Timestamp when server received a message | |
| shutdown.alarm | boolean | Shutdown alarm event | Command 0x01 with Key 0x02 | |
| side.call.button | boolean | Side call button alarm | Command 0x01 with Key 0x02 | |
| sos.alarm | boolean | SOS alarm triggered | ||
| spo2.rate | number | percentage | SPO2 rate | Command 0x01 with Key 0x41, Command 0x01 with Key 0x64 |
| spo2.rate.trust.level | number | percentage | SPO2 rate trust level | Command 0x01 with Key 0x41 |
| startup.alarm | boolean | Startup alarm event | Command 0x01 with Key 0x02 | |
| steps.count | number | The total number of steps for the day | Command 0x01 with Key 0x30 | |
| tilt.status | boolean | Device tilt status (true - device is tilted, false - device is in normal position) | Command 0x01 with Key 0x02 | |
| timestamp | number | seconds | Message timestamp | Command 0x01 with Key 0x02, Command 0x01 with Key 0x19, Command 0x01 with Key 0x20, Command 0x01 with Key 0x21, Command 0x01 with Key 0x22, Command 0x01 with Key 0x23, Command 0x01 with Key 0x24, Command 0x01 with Key 0x25, Command 0x01 with Key 0x26, Command 0x01 with Key 0x27, Command 0x01 with Key 0x28, Command 0x01 with Key 0x29, Command 0x01 with Key 0x2A, Command 0x01 with Key 0x2B, Command 0x01 with Key 0x2C, Command 0x01 with Key 0x30, Command 0x01 with Key 0x31, Command 0x01 with Key 0x40, Command 0x01 with Key 0x41, Command 0x01 with Key 0x64, Command 0x01 with Key 0x66, Command 0x03 with Key 0x24 |
| timestamp.key | number | Message timestamp in seconds with message sequence number appended as the value fractional part. Used to distinguish between several messages that have the same timestamp. | Command 0x01 with Key 0x02, Command 0x01 with Key 0x19, Command 0x01 with Key 0x20, Command 0x01 with Key 0x21, Command 0x01 with Key 0x22, Command 0x01 with Key 0x23, Command 0x01 with Key 0x24, Command 0x01 with Key 0x25, Command 0x01 with Key 0x26, Command 0x01 with Key 0x27, Command 0x01 with Key 0x28, Command 0x01 with Key 0x29, Command 0x01 with Key 0x2A, Command 0x01 with Key 0x2B, Command 0x01 with Key 0x2C, Command 0x01 with Key 0x30, Command 0x01 with Key 0x31, Command 0x01 with Key 0x40, Command 0x01 with Key 0x41, Command 0x01 with Key 0x64, Command 0x01 with Key 0x66 | |
| vehicle.state | string | Vehicle state, such as moving, idling, parked etc | Command 0x01 with Key 0x02 | |
| vehicle.state.bitmask | number | Vehicle state flags bitmask | Command 0x01 with Key 0x02 | |
| welfare.alarm.start | boolean | Welfare alarm event started | Command 0x01 with Key 0x02 | |
| welfare.alarm.stop | boolean | Welfare alarm event stopped | Command 0x01 with Key 0x02 | |
| wifi.home.status | boolean | Home Wi-Fi location flag | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 | |
| wifi.mac.address | string | Wi-Fi MAC address | Command 0x01 with Key 0x19, Command 0x01 with Key 0x22, Command 0x01 with Key 0x2A | |
| wifi.signal.strength | number | Wi-Fi signal strength, RSSI | Command 0x01 with Key 0x19, Command 0x01 with Key 0x22, Command 0x01 with Key 0x2A | |
| wifi.ssid | string | Wi-Fi SSID name | Command 0x01 with Key 0x19 | |
| wifi.status | boolean | Wi-Fi connection status | Command 0x01 with Key 0x24, Command 0x03 with Key 0x24 |