| Parameter | Type | Unit | Description | Sources |
|---|---|---|---|---|
| acceleration.array | array | g | Array of objects with acceleration data by x, y, and z axis | |
| accelerometer.data.seqnum | number | Sequence number of acceleration data package | ||
| ain | number | volts | Voltage on the analog input | Data field %AI, Data field %AV |
| ain.voltage.high.status | boolean | Analog input's voltage is above the threshold | Data field %AG | |
| autogeofence.status | boolean | Auto Geo-Fence Area status | Data field %PK | |
| backup.battery.voltage | number | volts | Backup battery voltage | Data field %BV |
| battery.low.status | boolean | Battery low status | Data field %BL | |
| ble.beacons | array | Standard parameter names used: *id* - beacon identification string. Usually it is beacon's UUID or MAC-address *local_name* - Beacons's Local Name *rssi* - BLE signal level. Units = dBm *battery.voltage* - Beacon's battery voltage. Units = volts *battery.level* - Beacon's battery level. Units = percentage *temperature* - Beacon's temperature. Units = celsius |
||
| bluetooth.connected.status | boolean | Bluetooth connection status | Data field %BT | |
| can.ambient.air.temperature | number | celsius | CAN ambient air temperature | Data field %JH |
| can.axle.weight | number | kg | Weight on the axle read from CAN | Data field %JH |
| can.cruise.control.mileage | number | km | Cruise control distance read from CAN | Data field %JN |
| can.cruise.status | boolean | CAN cruise control is active | Data field %JO | |
| can.driver.card.status | boolean | CAN-bus driver card presence | Data field %JO | |
| can.driver.time.related.status | number | CAN-bus driver time related states Indicating whether the driver approaches or exceeds working time limits. 0=normal; 1=15min before 4.5h; 2=4.5h reached; 3=15min before 9h; 4=9h reached; 5=15min before 16h; 6=16h reached; 14=Error; 15=not available | Data field %JO | |
| can.driver.work.state.enum | number | CAN-bus driver working state: 0=Rest; 1=Driver available; 2=Work; 3=Drive; 6=Error; 7=Not available | Data field %JO | |
| can.dtc | array | Diagnostic trouble code array read from CAN May content list of OBDII codes or list of objects with codes. Standard object parameter names used: *standard* - Protocol standard (J1939, J1708(J1587), OBDII) *mid* - Message Identifier (J1708) *sid* - Subsystem Identifier (J1708) *fmi* - Failure Mode Identifier (J1939, J1708) *spn* - Suspect Parameter Number (J1939) *sa* - Source Address (J1939, OBDII) *oc* - Occurrence Count (J1939) *cm* - Conversion Method (J1939) *status* - Status of error code (active, pending, historical, permanent) |
||
| can.dtc.cleared.mileage | number | km | Vehicle mileage since diagnostic trouble codes were cleared, read from CAN | Data field %DC |
| can.dtc.pending.status | boolean | Pending DTC status read from CAN | Data field %PD | |
| can.engine.coolant.temperature | number | celsius | Engine coolant temperature read from CAN | Data field %JO |
| can.engine.load.level | number | percentage | Calculated engine load level read from CAN | Data field %JO |
| can.engine.motorhours | number | hours | Total engine motorhours (engine work time) read from CAN | Data field %EH |
| can.engine.temperature | number | celsius | Engine temperature read from CAN | Data field %ET |
| can.fms.diagnostic.state | number | Status signal indicates whether the FMS Vehicle Interface supports the handling of diagnostic messages from the vehicle network onto the FMS network | Data field %JO | |
| can.fms.request.state | number | The status signal indicates whether the FMS Vehicle Interface will respond to requests from the FMS device for the PGNs listed in the FMS Interface Specification. | Data field %JO | |
| can.fuel.consumed | number | liters | Fuel volume totally consumed by vehicle read from CAN | Data field %FC |
| can.fuel.consumption | number | liters/h | Engine fuel rate read from CAN | Data field %JH |
| can.fuel.economy | number | km/liters | CAN instantaneous fuel economy | Data field %JH |
| can.fuel.idle.consumed | number | liters | Fuel volume totally consumed during idling state of the vehicle read from CAN | Data field %JN |
| can.fuel.level | number | percentage | Fuel level in tank read from CAN | Data field %JO |
| can.handling.info.status | boolean | CAN-bus handling information | Data field %JO | |
| can.intake.air.temperature | number | celsius | Intake air temperature | Data field %IA |
| can.intake.map | number | kPa | Intake manifold absolute pressure | Data field %MP |
| can.j1708.abs.state | number | CAN J1708 ABS control state bitmask | Data field %ZO | |
| can.j1708.accelerator.pedal.level | number | percentage | CAN J1708 accelerator pedal position | Data field %ZO |
| can.j1708.boost.pressure | number | kPa | CAN J1708 boost pressure | Data field %ZO |
| can.j1708.brake.pressure | number | kPa | CAN J1708 brake application pressure | Data field %ZO |
| can.j1708.brake.primary.pressure | number | kPa | CAN J1708 brake primary pressure | Data field %ZO |
| can.j1708.brake.secondary.pressure | number | kPa | CAN J1708 brake secondary pressure | Data field %ZO |
| can.j1708.brake.stroke.state | number | CAN J1708 brake stroke state bitmask | Data field %ZO | |
| can.j1708.cargo.weight | number | N | CAN J1708 cargo weight | Data field %ZH |
| can.j1708.cruise.control.state | number | CAN J1708 cruise control state bitmask | Data field %ZO | |
| can.j1708.engine.coolant.temperature | number | celsius | CAN J1708 engine coolant temperature | Data field %ZO |
| can.j1708.engine.load | number | percentage | CAN J1708 engine load | Data field %ZO |
| can.j1708.engine.motorhours | number | hours | CAN J1708 calculated engine motorhours | Data field %ZL |
| can.j1708.engine.oil.pressure | number | kPa | CAN J1708 engine oil pressure | Data field %ZO |
| can.j1708.engine.rpm | number | rpm | CAN J1708 engine RPM | Data field %ZH |
| can.j1708.fuel.level | number | percentage | CAN J1708 fuel level | Data field %ZO |
| can.j1708.fuel.rate | number | 10e-6L/s | CAN J1708 instantaneous fuel rate | Data field %ZH |
| can.j1708.fuel.used | number | liters | CAN J1708 total fuel used | Data field %ZL |
| can.j1708.fuel.used.idle | number | liters | CAN J1708 total idle fuel used | Data field %ZL |
| can.j1708.idle.motorhours | number | hours | CAN J1708 total idle hours | Data field %ZL |
| can.j1708.intake.manifold.temperature | number | celsius | CAN J1708 intake manifold temperature | Data field %ZO |
| can.j1708.mil.state | number | CAN J1708 malfunction attention/warning indicator lamps state bitmask | Data field %ZO | |
| can.j1708.parking.brake.state | number | CAN J1708 parking brake switch state bitmask | Data field %ZO | |
| can.j1708.throttle.pedal.level | number | percentage | CAN J1708 throttle pedal position | Data field %ZO |
| can.j1708.vehicle.mileage | number | km | CAN J1708 vehicle mileage | Data field %ZL |
| can.j1708.vehicle.motorhours | number | hours | CAN J1708 total vehicle hours | Data field %ZL |
| can.j1708.vehicle.speed | number | km/h | CAN J1708 vehicle speed | Data field %ZO |
| can.j1708.vehicle.vin | string | CAN J1708 vehicle VIN | Data field %ZS | |
| can.j1939.engine.fuel.total | number | liters | CAN-ubs J1939 FMS engine total fuel used | Data field %JL |
| can.j1939.engine.motorhours | number | hours | CAN J1939 calculated engine motorhours | Data field %JL |
| can.j1939.engine.rpm | number | rpm | CAN J1939 engine RPM | Data field %JH |
| can.j1939.fuel.consumed | number | liters | CAN J1939 fuel volume consumed by vehicle | Data field %JL |
| can.j1939.software.version | string | CAN-bus J1939 FMS SW-version | Data field %JS | |
| can.j1939.vehicle.mileage | number | km | CAN J1939 vehicle mileage | Data field %JL |
| can.j1939.vehicle.speed | number | km/h | CAN J1939 vehicle speed | Data field %JH |
| can.j1939.vehicle.vin | string | CAN J1939 vehicle VIN | Data field %JS | |
| can.maf.air.flow.rate | number | g/sec | MAF air flow rate read from CAN | Data field %MF |
| can.mil.bitmask | number | Malfunction indicator lamps state bitmask, read from CAN | ||
| can.mil.status | boolean | Malfunction indicator lamp status read from CAN | Data field %ML | |
| can.movement.status | boolean | Movement state read from CAN bus | Data field %JO | |
| can.overspeeding.status | boolean | CAN-bus ovespeeding status | Data field %JO | |
| can.pedal.brake.status | boolean | Footbrake pedal is depressed, read from CAN | Data field %JO | |
| can.pedal.clutch.status | boolean | CAN clutch pedal pressed | Data field %JO | |
| can.pending.dtc | string | Pending diagnostic trouble code read from CAN | Data field %PD | |
| can.powersource.takeoff.engaged.status | boolean | CAN-bus at least one PTO engaged | Data field %JO | |
| can.powersource.takeoff.enum | number | CAN power takeoff bitmask | Data field %JO | |
| can.powesource.takeof.duration | number | hours | PTO total duration read from CAN | Data field %JN |
| can.powesource.takeof.fuel.consumed | number | liters | CAN-bus Fuel Used During PTO | Data field %JN |
| can.reverse.gear.status | boolean | CAN reverse gear is on | Data field %JO | |
| can.service.mileage | number | km | Service distance read from CAN | Data field %JH |
| can.tacho.event | boolean | CAN-bus Tachograph system event | Data field %JO | |
| can.tacho.performance | number | CAN-bus Tachograph performance: 0=normal; 1=analysis | Data field %JO | |
| can.tacho.position.speed | number | km/h | CAN tachograph vehicle speed | Data field %JH |
| can.throttle.pedal.level | number | percentage | Throttle pedal push level read from CAN | Data field %JO |
| can.total.engine.idle.time | number | hours | Time of engine running in idling status (vehicle stopped) since vehicle manufacture, read from CAN | Data field %JN |
| can.vehicle.mileage | number | km | Total vehicle mileage read from CAN | Data field %EO |
| can.vehicle.speed | number | km/h | Vehicle speed read from CAN | Data field %ES |
| channel.id | number | ID of channel that received a message | ||
| counter.impulses | number | Impulses counter | Data field %PC | |
| custom | any | Any custom parameter | ||
| device.id | number | ID of device that received a message | ||
| device.name | string | Name of device that received a message | ||
| device.type.id | number | ID of device type of device that received a message | ||
| din | number | Digital inputs bitmask | Data field %IN | |
| dout | number | Digital outputs bitmask | Data field %OP | |
| driver.id | string | Driver identification card id | Data field %DD, Data field %JS | |
| driver.message | string | Driver text message content | ||
| engine.ignition.status | boolean | Engine ignition or ACC status | Data field %EG | |
| engine.motorhours | number | hours | Total calculated engine motorhours | Data field %EH |
| event.seqnum | number | Unique event sequence number | ||
| external.powersource.level | number | percentage | External battery level | Data field %BP |
| external.powersource.status | boolean | External power source connection status | Data field %PS | |
| external.powersource.voltage | number | volts | External power voltage | Data field %MV |
| fuel.level | number | percentage | Fuel level percentage | Data field %FL |
| fuel.sensor.status | boolean | Fuel sensor event status | Data field %FU | |
| geofence.status | boolean | Geofence entered status | Data field %GF | |
| gnss.antenna.short.circuit.status | boolean | GNSS antenna short circuit status | Data field %SS | |
| gnss.antenna.signal.timeout.status | boolean | GNSS antenna signal reception timeout status | Data field %SS | |
| gnss.antenna.status | boolean | GNSS receiver antenna status | Data field %SS | |
| gnss.fix.duration | number | seconds | Time used to fetch device GNSS position ("Time to GPS fix") | Data field %FT |
| gnss.fix.status | boolean | GNSS fix status | Data field %SF | |
| gnss.status | boolean | GNSS receiver on/off status | Data field %SS | |
| gprs.status | boolean | GPRS mobile network status | Data field %CG | |
| gsm.cellid | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID | Data field %CE | |
| gsm.home.network.event | boolean | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) home network registration event | Data field %CR | |
| gsm.jamming.event | boolean | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal jamming detected | Data field %JD | |
| gsm.lac | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code | Data field %LC | |
| gsm.mcc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code | Data field %CN | |
| gsm.mnc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code | Data field %CN | |
| gsm.operator.code | string | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) operator code, which is MCC joined with MNC | Data field %CN | |
| gsm.preferred.network.status | boolean | Preferred Mobile network (GSM, 3G, 4G, LTE, 5G, ...) status | Data field %PF | |
| gsm.roaming.network.event | boolean | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) home roaming registration event | Data field %RO | |
| gsm.signal.dbm | number | dbm | Strength of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal | Data field %RL |
| gsm.signal.level | number | percentage | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal strength level | Data field %GQ |
| gsm.sim.iccid | string | Integrated Circuit Card Id of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Data field %CD | |
| gsm.sim.imsi | string | IMSI of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Data field %CM | |
| gsm.state.enum | number | Mobile network module state | Data field %GS | |
| gsm.state.enum.description | string | Mobile network module state description | Data field %GS | |
| harsh.acceleration.event | boolean | Harsh acceleration detected | Data field %HA | |
| harsh.braking.event | boolean | Harsh braking detected | Data field %HB | |
| harsh.cornering.event | boolean | Harsh cornering detected | Data field %HC | |
| ibutton.code | string | Hexadecimal code of connected iButton | ||
| ident | string | Device unique identifier like serial number, IMEI, etc | ||
| idle.status | boolean | Vehicle is in idling state | Data field %DL | |
| impact.event | boolean | Impact event | Data field %IP | |
| main.power.low.status | boolean | Main power low status | Data field %PL | |
| message.buffered.status | boolean | Black box message | Data field %DT | |
| movement.status | boolean | Current movement state | Data field %MT | |
| network.signal.rsrp | number | dbm | LTE reference signal received power (RSRP) | Data field %GR |
| obd.connected.status | boolean | OBDII device is connected to vehicle | Data field %OC | |
| overspeeding.status | boolean | Overspeeding detected | Data field %SD | |
| peer | string | IP:port from which device connecting to the channel | ||
| position.altitude | number | meters | Altitude value for position | Data field %AT |
| position.direction | number | degrees | Heading angle at position detection moment | Data field %HD |
| position.filter.motion | number | GPS position filter by Motion | Data field %FP | |
| position.hdop | number | Horizontal dilution of precision | Data field %HP | |
| position.latitude | number | degrees | Latitude coordinate value | Data field %LA |
| position.longitude | number | degrees | Longitude coordinate value | Data field %LG |
| position.satellites | number | Quantity of satellites used to calculate coordinates for given position information | Data field %GP, Data field %SA | |
| position.speed | number | km/h | Instant speed at position detection moment | Data field %VS |
| position.timestamp | number | seconds | Timestamp when coordinates where calculated | |
| position.valid | boolean | Is position information accurate and valid for given timestamp | Data field %GP | |
| protocol.id | number | ID of protocol | ||
| report.reason | number | Transmission reason code | Data field %RD | |
| segment.max.acceleration | number | g | Maximum acceleration value that occurred on the segment | Data field %GV |
| segment.max.braking.acceleration | number | g | Maximum braking acceleration value that occurred on the segment | Data field %GV |
| segment.max.cornering.acceleration | number | g | Maximum cornering acceleration value that occurred on the segment | Data field %GV |
| segment.max.engine.load.level | number | percentage | Maximum engine load percentage on segment | Data field %EL |
| segment.max.engine.rpm | number | rpm | Maximum engine RPM on segment | Data field %RP |
| segment.max.position.speed | number | km/h | Maximum speed on segment | Data field %SM |
| segment.max.throttle.pedal.level | number | percentage | Maximum throttle pedal push level on segment | Data field %TR |
| segment.max.vertical.acceleration | number | g | Maximum vertical acceleration value that occurred on the segment | Data field %GV |
| send.timestamp | number | seconds | Message send timestamp | Data field %ST |
| sensor.humidity | number | percentage | Humidity sensor value, i.e. relative air humidity level | Data field %HT |
| sensor.temperature | number | celsius | Temperature sensor value | Data field %HT, Data field %TP |
| server.connection.status | boolean | Server connection status | Data field %CS | |
| server.timestamp | number | seconds | Timestamp when server received a message | |
| sim.card.state | number | SIM card state. Protocol specific numeric value | Data field %SR | |
| tilt.angle | number | degrees | Tilt angle | Data field %TL |
| timestamp | number | seconds | Message timestamp | Data field %RT |
| timestamp.key | number | Message timestamp in seconds with message sequence number appended as the value fractional part. Used to distinguish between several messages that have the same timestamp. | ||
| total.acceleration | number | Total acceleration for x, y and z axis | Data field %JF | |
| towing.event | boolean | Towing event detected | Data field %TW | |
| trip.engine.motorhours | number | Engine hours for current trip | Data field %WH | |
| vehicle.mileage | number | km | Total calculated mileage | Data field %EO, Data field %OD |
| vehicle.vin | string | VIN of vehicle | Data field %VN | |
| wifi.mac.address | string | WiFi MAC address | Data field %MA |