| Parameter | Type | Unit | Description | Sources |
|---|---|---|---|---|
| acceleration.array | array | g | Array of objects with acceleration data by x, y, and z axis | Packet head RPT |
| ain | number | volts | Voltage on the analog input | Packet head RPT |
| battery.charging.state | string | Protocol-specific battery charging state | Packet head RPT | |
| battery.level | number | percentage | Internal battery level | Packet head RPT |
| battery.low.alarm | boolean | Battery low alarm event | Packet head RPT | |
| battery.voltage | number | volts | Internal battery voltage | Packet head RPT |
| beidou.visible.satellites | number | Quantity of visible satellites from BEIDOU | Packet head RPT | |
| ble.beacons | array | Standard parameter names used: *id* - beacon identification string. Usually it is beacon's UUID or MAC-address *local_name* - Beacons's Local Name *rssi* - BLE signal level. Units = dBm *battery.voltage* - Beacon's battery voltage. Units = volts *battery.level* - Beacon's battery level. Units = percentage *temperature* - Beacon's temperature. Units = celsius |
Packet head RPT | |
| can.abs.failure.indicator.status | boolean | ABS failure indicator status read from CAN | Packet head RPT | |
| can.accelerator.pedal.kickdown.indicator.status | boolean | Accelerator pedal kickdown switch status, read from CAN | Packet head RPT | |
| can.accelerator.pedal.position | number | percentage | Accelerator pedal position read from CAN | Packet head RPT |
| can.adblue.level | number | percentage | AdBlue (diesel exhaust fluid) level read from CAN | Packet head RPT |
| can.airbag.indicator.status | boolean | Airbag indicator status read from CAN | Packet head RPT | |
| can.air.condition.status | boolean | CAN air conditioning is on | Packet head RPT | |
| can.ambient.air.temperature | number | celsius | CAN ambient air temperature | Packet head RPT |
| can.axle.weight | number | kg | Weight on the axle read from CAN | Packet head RPT |
| can.battery.charging.cycles | number | Number of battery charging cycles read from CAN | Packet head RPT | |
| can.battery.charging.indicator.state | string | Vehicle parameter for battery charging condition indicator read from CAN | Packet head RPT | |
| can.battery.indicator.status | boolean | Battery indicator status read from CAN | Packet head RPT | |
| can.battery.voltage | number | volts | Battery voltage read from CAN | Packet head RPT |
| can.brake.fluid.low.indicator.status | boolean | Brake fuel low indicator status read, from CAN | Packet head RPT | |
| can.brake.system.failure.indicator.status | boolean | Brake system failure indicator status, read from CAN | Packet head RPT | |
| can.central.lock.status | boolean | CAN central lock is locked | Packet head RPT | |
| can.check.engine.indicator.status | boolean | Check engine indicator status read from CAN | Packet head RPT | |
| can.coolant.level.low.indicator.status | boolean | Coolant level low indicator status read from CAN | Packet head RPT | |
| can.cruise.status | boolean | CAN cruise control is active | Packet head RPT | |
| can.driver.seatbelt.indicator.status | boolean | Driver's seatbelt indicator status read from CAN | Packet head RPT | |
| can.dtc | array | Diagnostic trouble code array read from CAN May content list of OBDII codes or list of objects with codes. Standard object parameter names used: *standard* - Protocol standard (J1939, J1708(J1587), OBDII) *mid* - Message Identifier (J1708) *sid* - Subsystem Identifier (J1708) *fmi* - Failure Mode Identifier (J1939, J1708) *spn* - Suspect Parameter Number (J1939) *sa* - Source Address (J1939, OBDII) *oc* - Occurrence Count (J1939) *cm* - Conversion Method (J1939) *status* - Status of error code (active, pending, historical, permanent) |
Packet head RPT | |
| can.dtc.number | number | Number of diagnostic trouble codes | Packet head RPT | |
| can.engine.all.starts.count | number | Engine all starts count read from CAN | Packet head RPT | |
| can.engine.braking.factor | number | Engine braking factor value, read from CAN | Packet head RPT | |
| can.engine.cold.starts.count | number | Engine cold starts count read from CAN | Packet head RPT | |
| can.engine.coolant.temperature | number | celsius | Engine coolant temperature read from CAN | Packet head RPT |
| can.engine.hot.indicator.status | boolean | Engine hot indicator status, read from CAN | Packet head RPT | |
| can.engine.ignition.starts.count | number | Engine starts by ignition read from CAN | Packet head RPT | |
| can.engine.motorhours | number | hours | Total engine motorhours (engine work time) read from CAN | Packet head RPT |
| can.engine.oil.temperature | number | celsius | Engine oil temperature read from CAN | Packet head RPT |
| can.engine.rpm | number | rpm | Engine RPM read from CAN | Packet head RPT |
| can.engine.torque.level | number | percentage | Engine torque level, read from CAN | Packet head RPT |
| can.eps.failure.indicator.status | boolean | EPS failure indicator status, read from CAN | Packet head RPT | |
| can.front.left.door.status | boolean | CAN front left door is opened | Packet head RPT | |
| can.front.right.door.status | boolean | CAN front right door is opened | Packet head RPT | |
| can.fuel.consumed | number | liters | Fuel volume totally consumed by vehicle read from CAN | Packet head RPT |
| can.fuel.consumption | number | liters/h | Engine fuel rate read from CAN | Packet head RPT |
| can.fuel.consumption.distance | number | liters/100km | Fuel consumption read from CAN | Packet head RPT |
| can.fuel.level | number | percentage | Fuel level in tank read from CAN | Packet head RPT |
| can.fuel.low.indicator.status | boolean | CAN low fuel indicator is on | Packet head RPT | |
| can.fuel.volume | number | liters | CAN fuel volume | Packet head RPT |
| can.gas.consumed | number | kg | Total mass of gas used by gaseous engine read from CAN | Packet head RPT |
| can.gaseous.fuel.level | number | percentage | Gaseous fuel level, read from CAN | Packet head RPT |
| can.gaseous.fuel.volume | number | liters | Gaseous fuel volume, read from CAN | Packet head RPT |
| can.handbrake.applies.count | number | Handbrake applies during ride count from CAN | Packet head RPT | |
| can.handbrake.status | boolean | CAN handbrake is pulled up | Packet head RPT | |
| can.hood.status | boolean | CAN hood is opened | Packet head RPT | |
| can.idle.fuel.consumed | number | liters | Total idle fuel used, read from CAN | Packet head RPT |
| can.lights.front.fog.light.status | boolean | CAN lights info - front fog light status | Packet head RPT | |
| can.lights.hazard.lights.status | boolean | CAN lights info hazard lights status | Packet head RPT | |
| can.lights.high.beam.status | boolean | CAN lights info - high beam status | Packet head RPT | |
| can.lights.low.beam.status | boolean | CAN lights info - low beam status | Packet head RPT | |
| can.lights.rear.fog.light.status | boolean | CAN lights info - rear fog light status | Packet head RPT | |
| can.lights.running.lights.status | boolean | CAN lights info - running lights status | Packet head RPT | |
| can.oil.level.low.indicator.status | boolean | Oil level low indicator status read from CAN bus | Packet head RPT | |
| can.oil.pressure.indicator.status | boolean | Oil pressure indicator status read from CAN bus | Packet head RPT | |
| can.pedal.brake.status | boolean | Footbrake pedal is depressed, read from CAN | Packet head RPT | |
| can.pedal.braking.factor | number | Pedal braking factor value, read from CAN | Packet head RPT | |
| can.pedal.clutch.status | boolean | CAN clutch pedal pressed | Packet head RPT | |
| can.pto.status | boolean | Power take-off status, read from CAN | Packet head RPT | |
| can.rear.left.door.status | boolean | CAN rear left door is opened | Packet head RPT | |
| can.rear.right.door.status | boolean | CAN rear right door is opened | Packet head RPT | |
| can.retarder.torque.load | number | percentage | Retarder torque load percentage read from CAN | Packet head RPT |
| can.reverse.gear.status | boolean | CAN reverse gear is on | Packet head RPT | |
| can.service.call.indicator.status | boolean | Service call indicator status, read from CAN | Packet head RPT | |
| can.service.mileage | number | km | Service distance read from CAN | Packet head RPT |
| can.service.time | number | days | Time to next service | Packet head RPT |
| can.total.accelerator.kickdowns | number | Total number accelerator kick-downs, read from CAN | Packet head RPT | |
| can.total.accelerator.kickdowns.time | number | hours | Total driving time when accelerator kick-down, read from CAN | Packet head RPT |
| can.total.brake.applications | number | Total count of brake applications, read from CAN | Packet head RPT | |
| can.total.cruise.control.time | number | hours | Total driving time when cruise control is ON, read from CAN | Packet head RPT |
| can.total.driving.time | number | hours | Engine run time read from CAN | Packet head RPT |
| can.total.effective.engine.speed.time | number | hours | Total effective engine speed time read from CAN | Packet head RPT |
| can.total.engine.cold.time | number | seconds | Total engine cold running time from CAN | Packet head RPT |
| can.total.engine.idle.time | number | hours | Time of engine running in idling status (vehicle stopped) since vehicle manufacture, read from CAN | Packet head RPT |
| can.total.engine.overspeed.time | number | hours | CAN total time, when vehicle engine rpm was greater than the limit defined in CAN configuration | Packet head RPT |
| can.total.fuel.counter | number | liters | Total fuel counter read from the vehicle, read from CAN bus | Packet head RPT |
| can.total.rapid.accelerations | number | Total number of rapid accelerations | Packet head RPT | |
| can.total.rapid.brakes | number | Total number of rapid brakes | Packet head RPT | |
| can.total.vehicle.overspeed.time | number | hours | CAN total time, when vehicle speed was greater than the limit defined in CAN configuration | Packet head RPT |
| can.tpms.indicator.status | boolean | Tire pressure monitoring system indicator status, read from CAN | Packet head RPT | |
| can.trailer.vin | string | Trailer VIN number, read from CAN | Packet head RPT | |
| can.trunk.status | boolean | CAN trunk is opened | Packet head RPT | |
| can.vehicle.battery.charge.current | number | amperes | Vehicle battery charging current read from CAN | Packet head RPT |
| can.vehicle.battery.charging.status | boolean | Vehicle battery charging status get from CAN Bus | Packet head RPT | |
| can.vehicle.battery.energy.recuperated | number | kWh | Recuperated energy into the vehicle battery read from CAN | Packet head RPT |
| can.vehicle.battery.level | number | percentage | CAN-bus reported vehicle battery level for EV or HEV | Packet head RPT |
| can.vehicle.battery.power | number | kW | Vehicle battery power read from CAN | Packet head RPT |
| can.vehicle.battery.temperature | number | celsius | Battery pack temperature, read from CAN | Packet head RPT |
| can.vehicle.energy.charged | number | kWh | Total electric energy charged read from CAN | Packet head RPT |
| can.vehicle.energy.used | number | kWh | Total electric energy used read from CAN | Packet head RPT |
| can.vehicle.energy.used.idle | number | kWh | Total electric energy used in the idling read from CAN | Packet head RPT |
| can.vehicle.mileage | number | km | Total vehicle mileage read from CAN | Packet head RPT |
| can.vehicle.speed | number | km/h | Vehicle speed read from CAN | Packet head RPT |
| can.wear.brake.pads.indicator.status | boolean | Wear brake pads indicator status, read from CAN bus | Packet head RPT | |
| channel.id | number | ID of channel that received a message | ||
| counter.impulses | number | Impulses counter | Packet head RPT | |
| crash.event | boolean | Crash event detected | Packet head RPT | |
| device.firmware.version | string | Firmware revision | Packet head VER | |
| device.id | number | ID of device that received a message | ||
| device.name | string | Name of device that received a message | ||
| device.type.id | number | ID of device type of device that received a message | ||
| din | number | Digital inputs bitmask | Packet head RPT | |
| door.alarm | boolean | Door alarm event | Packet head RPT | |
| dout | number | Digital outputs bitmask | Packet head RPT | |
| engine.ignition.status | boolean | Engine ignition or ACC status | Packet head RPT | |
| engine.motorhours | number | hours | Total calculated engine motorhours | Packet head RPT |
| event.code | string | Protocol-specific event code string | ||
| event.enum | number | Protocol-specific event code | Packet head RPT | |
| event.name | string | Protocol-specific event name | Packet head RPT | |
| external.powersource.status | boolean | External power source connection status | Packet head RPT | |
| external.powersource.voltage | number | volts | External power voltage | Packet head RPT |
| galileo.visible.satellites | number | Quantity of visible satellites from GALILEO | Packet head RPT | |
| geofence.id | number | Geofence ID | Packet head RPT | |
| geofence.status | boolean | Geofence entered status | Packet head RPT | |
| glonass.visible.satellites | number | Quantity of visible satellites from GLONASS | Packet head RPT | |
| gps.visible.satellites | number | Quantity of visible satellites from GPS | Packet head RPT | |
| gsm.cellid | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID | Packet head QNI, Packet head RPT | |
| gsm.lac | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code | Packet head RPT | |
| gsm.mcc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code | Packet head RPT | |
| gsm.mnc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code | Packet head RPT | |
| gsm.network.type | string | The type of the Mobile network the device is currently registered to | Packet head QNI, Packet head RPT | |
| gsm.signal.dbm | number | dbm | Strength of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal | Packet head QNI, Packet head RPT |
| gsm.signal.quality | number | The quality (bit error rate) of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal | Packet head QNI | |
| gsm.sim.iccid | string | Integrated Circuit Card Id of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Packet head QNI | |
| gsm.sim.imsi | string | IMSI of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) | Packet head QNI | |
| hardware.version | string | Hardware version | Packet head VER | |
| harsh.acceleration.event | boolean | Harsh acceleration detected | Packet head RPT | |
| harsh.braking.event | boolean | Harsh braking detected | Packet head RPT | |
| harsh.cornering.event | boolean | Harsh cornering detected | Packet head RPT | |
| ibutton.code | string | Hexadecimal code of connected iButton | Packet head RPT | |
| ident | string | Device unique identifier like serial number, IMEI, etc | ||
| idle.event | boolean | Idle detected | Packet head RPT | |
| idle.status | boolean | Vehicle is in idling state | Packet head RPT | |
| ignition.state | number | Ignition state according to device manual | Packet head RPT | |
| light.sensor.level | number | Light level detected by light sensor | Packet head RPT | |
| main.power.low.status | boolean | Main power low status | Packet head RPT | |
| message.buffered.status | boolean | Black box message | ||
| modem.firmware.version | string | Firmware version of the modem | Packet head VER | |
| movement.status | boolean | Current movement state | Packet head RPT | |
| network.ip.address | string | IP address of the network | Packet head QNI | |
| onewire.sensor.humidity | number | percentage | External 1-Wire humidity sensor value | Packet head RPT |
| onewire.sensor.serial | string | External 1-Wire sensor serial number in HEX representation | Packet head RPT | |
| onewire.sensor.temperature | number | celsius | External 1-Wire temperature sensor value | Packet head RPT |
| overspeeding.event | boolean | Overspeeding detected | Packet head RPT | |
| payload.hex | string | HEX Payload received from device | Packet head BMR | |
| peer | string | IP:port from which device connecting to the channel | ||
| position.altitude | number | meters | Altitude value for position | Packet head RPT |
| position.direction | number | degrees | Heading angle at position detection moment | Packet head RPT |
| position.hdop | number | Horizontal dilution of precision | Packet head RPT | |
| position.latitude | number | degrees | Latitude coordinate value | Packet head RPT |
| position.longitude | number | degrees | Longitude coordinate value | Packet head RPT |
| position.satellites | number | Quantity of satellites used to calculate coordinates for given position information | Packet head GAV, Packet head GSV, Packet head LSV | |
| position.speed | number | km/h | Instant speed at position detection moment | Packet head RPT |
| position.valid | boolean | Is position information accurate and valid for given timestamp | Packet head RPT | |
| power.on.status | boolean | Power-on device status | Packet head RPT | |
| protocol.id | number | ID of protocol | ||
| protocol.version | string | Protocol version string | Packet head GAV, Packet head GSV, Packet head HBD, Packet head LSV, Packet head RPT, Packet head VER | |
| remaining.range | number | km | Current remaining range | Packet head RPT |
| satellite.power | number | Satellite power | Packet head GAV, Packet head GSV, Packet head LSV | |
| sensor.humidity | number | percentage | Humidity sensor value, i.e. relative air humidity level | Packet head RPT |
| sensor.temperature | number | celsius | Temperature sensor value | Packet head RPT |
| sensor.x.acceleration | number | g | Acceleration sensor X-axis value | Packet head RPT |
| sensor.y.acceleration | number | g | Acceleration sensor Y-axis value | Packet head RPT |
| sensor.z.acceleration | number | g | Acceleration sensor Z-axis value | Packet head RPT |
| server.timestamp | number | seconds | Timestamp when server received a message | |
| tacho.driver.card.code | string | Driver identification card id for tacho | Packet head RPT | |
| tacho.driver.name | string | Tachograph driver name | Packet head RPT | |
| temperature.high.alarm | boolean | Temperature hight alarm | Packet head RPT | |
| temperature.low.alarm | boolean | Temperature low alarm | Packet head RPT | |
| timestamp | number | seconds | Message timestamp | Packet head RPT |
| total.mileage | number | km | Total mileage | Packet head RPT |
| towing.event | boolean | Towing event detected | Packet head RPT | |
| trip.engine.motorhours | number | Engine hours for current trip | Packet head RPT | |
| vehicle.mileage | number | km | Total calculated mileage | Packet head RPT |
| vehicle.registration.number | string | Vehicle registration number | Packet head RPT | |
| vehicle.vin | string | VIN of vehicle | Packet head RPT |