| Parameter | Type | Unit | Description | Sources |
|---|---|---|---|---|
| alarm.mode.status | boolean | Device alarm mode status | Message ID 0x0200 | |
| battery.charging.state | string | Protocol-specific battery charging state | Extension ID 0xF7 of Message ID 0x0200 | |
| battery.level | number | percentage | Internal battery level | Extension ID 0xF7 of Message ID 0x0200 |
| battery.voltage | number | volts | Internal battery voltage | Extension ID 0xF7 of Message ID 0x0200 |
| ble.beacons | array | Standard parameter names used: *id* - beacon identification string. Usually it is beacon's UUID or MAC-address *local_name* - Beacons's Local Name *rssi* - BLE signal level. Units = dBm *battery.voltage* - Beacon's battery voltage. Units = volts *battery.level* - Beacon's battery level. Units = percentage *temperature* - Beacon's temperature. Units = celsius |
Extension ID 0xF3 of Message ID 0x0200, Message ID 0x0900 | |
| channel.id | number | ID of channel that received a message | ||
| data.type.enum | number | Data type code | Extension ID 0xF6 of Message ID 0x0200 | |
| device.id | number | ID of device that received a message | ||
| device.name | string | Name of device that received a message | ||
| device.type.id | number | ID of device type of device that received a message | ||
| displacement.alarm | boolean | Displacement alarm event | Message ID 0x0200 | |
| engine.blocked.status | boolean | Engine blocked status (fuel cutoff relay), true - engine is blocked, false - engine isn't blocked | Message ID 0x0200, Message ID 0x0900 | |
| engine.ignition.on.duration | number | seconds | Duration when engine is on | Extension ID 0xF9 of Message ID 0x0200 |
| engine.ignition.status | boolean | Engine ignition or ACC status | Message ID 0x0200, Message ID 0x0900 | |
| event.enum | number | Protocol-specific event code | Message ID | |
| event.seqnum | number | Unique event sequence number | Message Sequence Number | |
| external.powersource.voltage | number | volts | External power voltage | Extension ID 0xF1 of Message ID 0x0200 |
| gnss.failure.alarm | boolean | GNSS receiver failure alarm event | Message ID 0x0200 | |
| gpio.input | number | GPIO Input channel | Extension ID 0xF5 of Message ID 0x0200 | |
| gpio.output | number | GPIO Output channel | Extension ID 0xF5 of Message ID 0x0200 | |
| gsm.cellid | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID | Extension ID 0xF0 of Message ID 0x0200 | |
| gsm.lac | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code | Extension ID 0xF0 of Message ID 0x0200 | |
| gsm.mcc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code | Extension ID 0xF0 of Message ID 0x0200 | |
| gsm.mnc | number | Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code | Extension ID 0xF0 of Message ID 0x0200 | |
| gsm.network.type | string | The type of the Mobile network the device is currently registered to | Message ID 0x0200, Message ID 0x0900 | |
| gsm.signal.dbm | number | dbm | Strength of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal | Extension ID 0xF0 of Message ID 0x0200 |
| gsm.signal.quality | number | The quality (bit error rate) of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal | Extension ID 0x30 of Message ID 0x0200 | |
| ident | string | Device unique identifier like serial number, IMEI, etc | ||
| main.powersource.status | boolean | Main power supply connection status | Message ID 0x0200 | |
| message.buffered.status | boolean | Black box message | Message ID 0x0200, Message ID 0x0900 | |
| overspeeding.event | boolean | Overspeeding detected | Message ID 0x0200 | |
| payload.hex | string | HEX Payload received from device | Message ID 0x0900 | |
| peer | string | IP:port from which device connecting to the channel | ||
| position.altitude | number | meters | Altitude value for position | Message ID 0x0200, Message ID 0x0900 |
| position.direction | number | degrees | Heading angle at position detection moment | Message ID 0x0200, Message ID 0x0900 |
| position.fix.age | number | seconds | Time since the last position fix | Extension ID 0xF9 of Message ID 0x0200 |
| position.hdop | number | Horizontal dilution of precision | Extension ID 0xF9 of Message ID 0x0200 | |
| position.latitude | number | degrees | Latitude coordinate value | Message ID 0x0200, Message ID 0x0900 |
| position.longitude | number | degrees | Longitude coordinate value | Message ID 0x0200, Message ID 0x0900 |
| position.satellites | number | Quantity of satellites used to calculate coordinates for given position information | Extension ID 0x31 of Message ID 0x0200 | |
| position.speed | number | km/h | Instant speed at position detection moment | Message ID 0x0200, Message ID 0x0900 |
| position.timestamp | number | seconds | Timestamp when coordinates where calculated | Extension ID 0xF9 of Message ID 0x0200 |
| position.valid | boolean | Is position information accurate and valid for given timestamp | Message ID 0x0200, Message ID 0x0900 | |
| protocol.id | number | ID of protocol | ||
| sensor.humidity | number | percentage | Humidity sensor value, i.e. relative air humidity level | Extension ID 0xF6 of Message ID 0x0200 |
| sensor.humidity.limit.max | number | percentage | Humidity sensor limit (max) | Extension ID 0xF6 of Message ID 0x0200 |
| sensor.humidity.limit.min | number | percentage | Humidity sensor limit (min) | Extension ID 0xF6 of Message ID 0x0200 |
| sensor.illuminance | number | lux | Illuminance measured by light sensor | Extension ID 0xF6 of Message ID 0x0200 |
| sensor.illuminance.limit.max | number | Illuminance sensor limit (max) | Extension ID 0xF6 of Message ID 0x0200 | |
| sensor.temperature | number | celsius | Temperature sensor value | Extension ID 0xF6 of Message ID 0x0200 |
| sensor.temperature.limit.max | number | celsius | Temperature sensor limit (max) | Extension ID 0xF6 of Message ID 0x0200 |
| sensor.temperature.limit.min | number | celsius | Temperature sensor limit (min) | Extension ID 0xF6 of Message ID 0x0200 |
| server.timestamp | number | seconds | Timestamp when server received a message | |
| timestamp | number | seconds | Message timestamp | Message ID 0x0200, Message ID 0x0900 |
| timestamp.key | number | Message timestamp in seconds with message sequence number appended as the value fractional part. Used to distinguish between several messages that have the same timestamp. | Message ID 0x0200 | |
| towing.event | boolean | Towing event detected | Message ID 0x0200, Message ID 0x0900 | |
| vehicle.mileage | number | km | Total calculated mileage | Extension ID 0x01 of Message ID 0x0200 |
| vibration.alarm | boolean | Vibration alarm event | Message ID 0x0200 | |
| wifi.mac.address | string | WiFi MAC address | Extension ID 0xF4 of Message ID 0x0200 | |
| wifi.signal.strength | number | WiFi signal strength, RSSI | Extension ID 0xF4 of Message ID 0x0200 | |
| work.mode | number | Protocol-specific work mode | Extension ID 0xF8 of Message ID 0x0200 | |
| x.acceleration | number | g | Accelerometer value X | Extension ID 0xF6 of Message ID 0x0200 |
| y.acceleration | number | g | Accelerometer value Y | Extension ID 0xF6 of Message ID 0x0200 |
| z.acceleration | number | g | Accelerometer value Z | Extension ID 0xF6 of Message ID 0x0200 |